New to the forum, first, I greet you all for the good job. Now to my question, I've just got Eurovox EX7000HD+ which I scanned using deep scan and I got many channels but most channel are just showing scrambled channel. Pls what can I do and what stuff do I need to get all the channels especially sports up and running.
Getting Eurovox EX7000 HD+ up and running
Collapse
X
-
Hi
Click on downloadsat top of screen, go to eurovox section, click on firmware, scroll down half way and find firmware that says "New ex7000HD firmware 12.03.09". Download it to a usb pen drive and rename file to Flash.tbn Switch on ex7000 put usb stick in usb port at back switch power off to box using switch at back, switch back on and then you should see on lcd screen that the unit is flashing and it counts down the progress. When it finishes rescan and it should work -
Thanks for your response. I downloaded the firmware onto my usb pen, put it on the box, the box detected it and show open USB on the screen but no flashing and progress bar on the screen. I scan for the channels again but I still have scrambled channels. I don't know whether I didn't download the firmware properly, pls help!Comment
-
EX7000 HD+
It worked for me, but you must rename the file then put the pen in the usb port, switch off the device on the back of the box, then switch back on again and the file should automatically boot the system up.Comment
-
Hi
HiNew to the forum, first, I greet you all for the good job. Now to my question, I've just got Eurovox EX7000HD+ which I scanned using deep scan and I got many channels but most channel are just showing scrambled channel. Pls what can I do and what stuff do I need to get all the channels especially sports up and running.
Click on downloadsat top of screen, go to eurovox section, click on firmware, scroll down half way and find firmware that says "New ex7000HD firmware 12.03.09". Download it to a usb pen drive and rename file to Flash.tbn Switch on ex7000 put usb stick in usb port at back switch power off to box using switch at back, switch back on and then you should see on lcd screen that the unit is flashing and it counts down the progress. When it finishes rescan and it should workComment
-
hello thanks for your help but done everything you have said but dont get the flashing or the timer and still scrambled channels please help thanks its a brand new boxComment
-
hello i am new to this but i have done everything you have said inc renamin it flash.tbn but still get no flashin or countdown on lcd screen your help would be much appreciated many thanksComment
-
you won't get any channels coz cable gone to nag3
read this http://www.digital-kaos.co.uk/forums...75/#post768411Comment


Comment