can any help. i am still struggling with my set up.i have this message on the screen after i've done power scan and want to update channels" no transpoder to scan"
-
-
Hi,
I had this problem when I first set mine up a few days ago. You need to select a different frequency and then scan again. There are only three to choose from and one of these will work!Comment
-
Hi, I'm new to all this and have just tried to set up my EX5000 PVR also without any luck. I've got a signal strength in the 70s to 80s and when doing a power scan the signal and level bars are up in the 90s. When scan is complete there are no channels available and no transponder found??? I've tried all 3 different scan settings and the instructions doesn't mention a need to download firmware so any help would be appreciated??????Comment
-
eurovox pvr v1.1a ,,look in downloads at top of page.Comment
-
Thanks, I'll try to download the firmware and see where it gets me??Comment
-
when you dowwnload the firmware do you have to do a channel update also?Comment
-
ex5000pvr
hi there,
i am up and running now.i had to remove my splitter and scan after that all the channels appeared.i have refixed my splitter for my broadband
and there is no problem. i did not even flash it. thanks all once again
abillyComment
-
your better doing a system reset benny re load the firmware, then a new scan,,clear the decks so as to speak,,i had a bit of trouble with channels not going into favs.Comment
-
I've flashed the firmware with 1.1 but still no luck, the signal is around the 70% mark before scanning for channels but seems to drop to 8% for a split second and then returns. While doing a power scan, (have tried all 3 ranges), the percentages are up in the 90%'s but during this scan I still get a "TP 0" signal and nothing comes into the channel section it remains blank. After the scan is complete, there are no channels picked up and when I try an update channels I get a "No Transponder" message. Have ta
ken out the splitter and tried the connection straight into the back of the box but still the same input quality of signal?? When I reconnect the cable back to the tv I get the cable channels I had before no problem. Does anyone have any other ideas or fixes?
Comment
-
I'm having exactly the same problem as you mate - no channels at all but I have flashed the box with the latest upgrade and tried all the frequencies - anybody got any ideas?Comment
-
what box you got m8Comment
-
I think its a EX500 and i bet there on the old TW network these boxes are a right f***r to scan on TW as they miss all but a few transponders !! i have to put an old eurovox channel list onto it first then re'scan to get any joy out of these poxy things, after that there fine though.Comment
-
alright mate just thought u mite help. am having trouble with me
ex5000 put new firmware on.
getting all the channels sound but there not saving on to favs automatic. i did save the data and flashed it back but wean i go
to favs it just says no channels saved.
i no u can set the favs up ur self but its a f**kin pain.
i liked it the way it was be for. will i have to do a reset then flash the box again. thanks any helpComment
-
"No Transponder Found"
Hi, I have just hooked up an EX5100 and was getting the same message and found that I had hooked the main input into the aerial socket (DUH). Once I had rectified this it scanned ok, however I was under the impression that it would pick up a lot more channels than it does. It lists up to about 120 but only half work.Comment
Comment