eurovox setup problems!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • danb07
    Newbie
    • Aug 2008
    • 18

    #1

    eurovox setup problems!

    hi guys girls... I am trying to set my box up! all hooked up! done a powerscan and found all of the channels! However the non freeview ones are all scrambled... i need to connect to laptop to download firmware to box.. but i just cant connect! any ideas? does box need to be off? etc... or is there any other way of unscrambling? cheers
  • Digger
    Top Poster
    • Apr 2008
    • 154

    #2
    you need to connect to your loaptop with a null modem cable and upload the firmware to the box and then scan the box again

    Comment

    • danb07
      Newbie
      • Aug 2008
      • 18

      #3
      yeah I am hooked up with all the right equipment... My box is on and I am watching tv! If I were to plug in now.. all i get is new hardware found and thats it... tries to install and then fails... its a null cable connected to a usb... Iam lost!!

      Comment

      • Digger
        Top Poster
        • Apr 2008
        • 154

        #4
        well it must be the wrong firmware your usin as there r red and blue boxs so ya must check which box you have, there maybe a fault with your usb adapter as they r known to be tempermental...

        Comment

        • biffo1
          V.I.P. Member
          • Mar 2008
          • 420

          #5
          also put ur box on stand by is it blue/red euro box fw , 2007 2008 model
          [CENTERsigpic[/CENTER]

          Comment

          • halau
            Senior Member
            • Aug 2008
            • 278

            #6
            sounds like an issue with the usb and null conection, do a search for the right driver for the usb unit

            Comment

            • thekid888
              Newbie
              • Oct 2008
              • 14

              #7
              You need to use a null modem cable mate direct to your PC ... It wont work through a serial cable and as most laptops dont come equiped with com ports yow will need to use a home computer and go through the port on your hard drive .. I was weeks figuring that out .. Trust me it will work!!!!!!

              Comment

              Working...