any ideas

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • terrain
    Member
    • Aug 2008
    • 46

    #1

    any ideas

    hi after a week i have finally managed to set up my eurovox with all the channels the box came with wd hard drive installed when i try to record i get the message hard drive full or not installed i have tried taking the hard drive out and replacing it in again a few times but its still the same anyone any ideas to fix it as i didn't want to have to send it back.
  • satsmo
    V.I.P. Member
    • Jun 2008
    • 6397

    #2
    You need to do a recording before the drive is recognised in some cases. I presume you flashed with 1.1A firmware?
    I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

    Comment

    • terrain
      Member
      • Aug 2008
      • 46

      #3
      Originally posted by satsmo
      You need to do a recording before the drive is recognised in some cases. I presume you flashed with 1.1A firmware?
      yes flashed with 1.1A tried to record with timer and instant record keep getting message error hard drive full or not installed. had the hard drive in and out a few times still no joy. been in touch with e-bay seller waiting for his reply.

      Comment

      • satsmo
        V.I.P. Member
        • Jun 2008
        • 6397

        #4
        Have you tried a factory reset and reflash?
        I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

        Comment

        • terrain
          Member
          • Aug 2008
          • 46

          #5
          Originally posted by satsmo
          Have you tried a factory reset and reflash?
          no haven't done a factory reset or reflash but e-bay seller has been in touch and told me to send box back on Friday when his new stock comes in and will send a new box out to me he says must be a fault with box. thanks for your help.

          Comment

          • jh1
            Newbie
            • Sep 2008
            • 6

            #6
            my signal is showing only 8 % on channels any ideas on improving this

            Comment

            Working...