Trouble with Eurovox max V 2008

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kaisersozeruk
    Newbie
    • Sep 2008
    • 18

    #1

    Trouble with Eurovox max V 2008

    Hi guys recently brought a black eurovox max v 2008 box off of ebay, downloaded the firmware update from april successfully, performed a powerscan however after the scan it still displays no channels, cable is plugged into the RF connection as it should be, is it a faulty box and should I send it back?
  • shady77
    Banned
    • Aug 2008
    • 982

    #2
    hi mate, not had a eurovox but try this from another forum.

    Try flashing with the firmware before the 8% signal one. think its the one above on the toolbar 18-04-08 is the date for it, i had a few probs and i had flashed mine with the 8% firmware, once i changed it all the probs went away.

    Comment

    • satsmo
      V.I.P. Member
      • Jun 2008
      • 6397

      #3
      Are you scanning on the correct symbol rate. 6887 for N**, 6952 for others?
      I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

      Comment

      • kaisersozeruk
        Newbie
        • Sep 2008
        • 18

        #4
        Thanks guys yes I have tried all three symbol rates, have yet to try the previous firmware update, will give that a go and let you know fingers crossed

        Comment

        • shady77
          Banned
          • Aug 2008
          • 982

          #5
          try this, its the july firmware.
          good luck
          Attached Files

          Comment

          • kaisersozeruk
            Newbie
            • Sep 2008
            • 18

            #6
            Thanks will do, also I noticed that with normal n** boxes they have a pin connection at the back and my box uses a standard RF connection, could this be the problem?

            <--kaisersozeruk added 1 Minutes and 24 Seconds later...-->

            Also will I have to remove the previous update and if so how?
            Last edited by kaisersozeruk; 9 September, 2008, 13:32. Reason: Automerged Doublepost

            Comment

            • shady77
              Banned
              • Aug 2008
              • 982

              #7
              your flash programme should have an option to erase current image, i wouldnt of thought that connection would be a problem i take it you have an adaptor to go from the feed cable to the back of your box. i have on on my digivox and thats fine.
              silly question but there is a live feed coming into your house isnt there?

              Comment

              • kaisersozeruk
                Newbie
                • Sep 2008
                • 18

                #8
                I brought a a cable from maplins with the rf connector moulded on one end and the cable pin connection on the other, yes I have a feed coming in, I bet it's something simple. I'll give your recommendations a go and get back to you thanks again mate

                Comment

                • kaisersozeruk
                  Newbie
                  • Sep 2008
                  • 18

                  #9
                  Thanks for the help Shady, worked a treat, any ideas on how long my tv utopia will last?

                  Comment

                  • shady77
                    Banned
                    • Aug 2008
                    • 982

                    #10
                    do you pay vermin media for any service? i pay for the broadband so the signal continually comes into my house. if you dontpay they can disconnect your feed at anytime. maybe look into getting the base tv pack from them or a phoneline which the base tv pack comes free with. good luck

                    Comment

                    • jh1
                      Newbie
                      • Sep 2008
                      • 6

                      #11
                      hi i am new to this is there an option to record on the eurovox 2008 max?

                      Comment

                      • tarabey
                        Newbie
                        • Sep 2008
                        • 4

                        #12
                        can anyone give me any idea which one is the best for all the euro-vox's, I need to buy one some time next week.
                        thank you in advance.

                        Comment

                        • viking2008
                          Newbie
                          • Nov 2008
                          • 1

                          #13
                          greta help thanks

                          Comment

                          • jjchefy
                            Newbie
                            • Nov 2008
                            • 2

                            #14
                            hi can you helpme got eurovox maxv box and it will not get codes ,i try firmware 10/4/2008 .but will not get codes

                            Comment

                            • JohnnyF
                              Newbie
                              • Nov 2008
                              • 9

                              #15
                              Hi Guys!
                              Don't know if this is of any interest to you, but having used the basic Vermin media TV pack I found that I could switch down to freeview!
                              So in effect I dont pay owt for the TV and my box works sound!
                              I own a Eurovox Max and its worked ok on the freeview for 4 months so far, up until the recent troubles which I have sorted by manually inputting the keys!
                              Cheers from Leeds!

                              Comment

                              Working...