Eurovox PVR firmware update problem

[webonline]

I am trying to update my new EV5000 PVR with the latest UFL firmware 1.1 / 1.1a However I have some problems.

Using a laptop with a USB to 9pin serial adaptor connection.
Assigned COM1 to USB adaptor.
When I start the UFL it by default starts to look for COM1.

On selecting DOWNLOAD - I get a START button and on selecting this I get the following message:

"The receiver was not detected"
"If you want to download the firmware in the boot mode, click OK button below and AC power on your receiver"
COM Port settings:
COM1 COM2 COM3 COM4 (You can select one of these)

I again selected COM1 port.

then UFL displays a message 'Waiting response from Receiver...'
and nothing happened for Hours.

I have a Serial cable (F-type)) supplied with the box, so I have assumed it is a NULL modem cable. I hav einstalled all driver for USB-serial converter.

Help much appreciated.

Thanks

[Barnsley Bill]

Go into device manager and assign a comport 4 or lower...there will be a guide on here..how to do this.

[bigzed]

Similar problem with eurovox max blue

I have the same problem, however I am using a 9 pin to 9 pin null modem lead, and still no response from the receiver .
Anyone any ideas.

[rudeboi786]

i wouldnt use a usb adapter i think its a waste of time personally speaking

[thered]

YOU HAVE GOT YOUR BOX PLUGGED IN HAVENT YOU


i would only use a null modem cable (nine pin to nine pin) your box needs to be plugged in

make sure your using com port 1

then you turn the box on when you download the firmware

[lisa301]

this is whats happening to me my head is totally battered through it been like this for days now plzz help me thanks

[HiTeck]

Have a read through the stickies at the top of the page all the info for setting up your com ports is there,

Heres the link,

http://www.digital-kaos.co.uk/forums/f71/guide-cables-required-flashing-eurovox-9786/

[lisa301]

yeah that what im using

[lisa301]

but i havent dont that 1968 think will do tomorow