If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Check what transponder the glitching channels are on then go to menu,installation and edit the transponder freq example 538000 change to 538750 see if that helps if it dont try the 8% kuro as thered suggested.
i have heard the odd bad report on the 8% kuro image on forums but never came across anyone with a problem with it i know 3 people who have been using since april with no problems
Comment