EUROVOX EX6000SD SETUP (idiots guide)
hi, yesteerday i was new to all this eurovox stuff, i didnt even know what they were till my mate at work told me the other day, so i took the plunge and ordered one which arrived today, within half an hour it is set up and am getting ALL the channels....easy isnt the word! i thought it was going to be a struggle but am really surprised,
heres how it worked for me:
i formatted a usb stick to fat32 and downloaded the kuro2.stb firmware file and copied it to the usb, next i put the usb into the eurovox and powered up, the display showed some numbers and letters for about 1 min then settled at 0000, then i powered down the unit and removed the usb, connected the scart and cable leads and powered back on, followed the instructions and did a power scan which then found all the channels and set them up ready to watch! job done (well at least until nagra3 anyway)
the reason i found this so easy was because beforehand i scoured the posts on here and got as much info as possible, so, thanks to all contributers on here.
heres how it worked for me:
i formatted a usb stick to fat32 and downloaded the kuro2.stb firmware file and copied it to the usb, next i put the usb into the eurovox and powered up, the display showed some numbers and letters for about 1 min then settled at 0000, then i powered down the unit and removed the usb, connected the scart and cable leads and powered back on, followed the instructions and did a power scan which then found all the channels and set them up ready to watch! job done (well at least until nagra3 anyway)
the reason i found this so easy was because beforehand i scoured the posts on here and got as much info as possible, so, thanks to all contributers on here.
Comment