Channel Scrambled

[shiva]

HI, Folks
On a few channels I get the message Channel Scrambled, these are disney, sly premier & prem+. Any ideas on whats wrong as they worked before. its the 5000pvr.

[HiTeck]

On the channels that are scrambled press info twice, take a not of the frequency then go to menu, User installation pin 0000, then highlight the problem freqs by pulling down on your remote , press OK so a tick shows then press the BLUE button for manual scan, screen will go blank for around 30 sec's but just wait for it to finnish, when you exit your channels should be working fine.

[shiva]

On the channels that are scrambled press info twice, take a not of the frequency then go to menu, User installation pin 0000, then highlight the problem freqs by pulling down on your remote , press OK so a tick shows then press the BLUE button for manual scan, screen will go blank for around 30 sec's but just wait for it to finnish, when you exit your channels should be working fine.

Thaks HiTEK for the info. All works fine expect for premier.

[Sharky]

Nice one. Cheers.

[frazzles]

hi newbie hear a lot of all my channels have came up with scrambled channel, i have just fitted a euro 1000sl do i have to do this to all the channels manually

[jckw]

have a good read m8
Eurovox

[gazza2008]

frazzels u need 2 put firmware on ya box pal

if u bought it new it comes with FTA software only

this is the firmware u need for your box >>>>> Digital Kaos - Downloads - UFL_EX1000SL_24-02-09_nosort_DarX

any probs come bak we will help you

u need a RS232 lead connect it 2 ya comp and to ya box open the loader press download

[frazzles]

hi all newbie here again does it need to be connected to the cable or can it just be turned on and then downloaded un connected from the cable or does everything need to be connected to work, as the cable i have can only be put on to me desk top upstairs , until the shops open tomorrow i am knackered. if that is the case.

[gmb45]

hi all newbie here again does it need to be connected to the cable or can it just be turned on and then downloaded un connected from the cable or does everything need to be connected to work, as the cable i have can only be put on to me desk top upstairs , until the shops open tomorrow i am knackered. if that is the case.

u just need to connect it 2 computer to flash it m8

[d rabe]

i too have just joined the forum i have a eurovox max v
i have scrambled channels..i need to flash it???i am unable to down load yet??i am very new to this but willing to learn

[Yumraaj]

You will only be able to download after you post something. Hope this help.

[satsmo]

Welcome to the forum Take a read through the red stickies at the top of the section Eurovox

You will be able to download shortly after the server updates your account. While you are waiting why not pop in here Introduce Yourself and say hello.