Hi all, i seem to be having a problem with my eurovox since the clocks went back, i changed the setting on the box, tried everything, also defaulted the unit, but still the same results, for some reason when i go to the epg it starts by displaying the day before, which means i have to keep pressing up ontill if reaches todays data and time, is there any way to fix this. i have checked with 2 other boxes and they show the same results as mine.
-
-
Heard of it been an hour out but not a day. Have you checked the year/date settings in the time set up?I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams -
Yes have checked all that any other ideas
thanksComment
-
What model is it? Have you tried a factory reset or reflash?I refuse to answer that question on the grounds that I don't know the answer. - Douglas AdamsComment
-
Yes have tried a full reset still the same not sure what is going on, also would you know what loader and files i need for the digivox-t to work with ch***s
thanksComment
-
I replyed to your other thread regards the firmware. I presume you are in Ireland? If thats the case try this for the EV:
1. Pull plug on the back of the EV for a few seconds then plug back in again..
2. When EV powers up, immediately press menu, config and time settings.
3. Set correct time using GMT settings.
4. Then turn GMT OFF.
5. Press blue button to save and exit.
It may take more than one attempt so just be patient, it does work. One thing to note though when you have the EPG correct, is to just put it in standby at night, if you unplug it you will have to go through the whole process again.I refuse to answer that question on the grounds that I don't know the answer. - Douglas AdamsComment
-
will give it a try again thanksComment
Comment