problems with eurovox max v firmware

[thered]

flashing with new firmware but signal is now breaking up a lot making it unwatchable was fine with old firmware just wondering if anyone else is having the same probs

[luco10]

has the interface changed? where can i get the new firmware?

[doobiest]

unfortunatley the new firmware is actually an older one modified, it doesn't have the signal fix that the last firmware release (UFL_MaxV_Kuro3_T_signal fix_28_04_08) had :-(

so unless that one gets modified to take the new keyroll method or a signal fix is added to the current ver.2.0 firmware your stuffed!

[Neo75]

it sounds like you signal is too high try an 10 or 6 db attenuator, im a sat engineer im not very clued up on cable but had the same problem on my max v with channels breaking up added a 10db attenuator & its fine