If ur getting blank screen and codes like 0000 or 0001 etc etc then try this to fix

[immy_2k]

heres what u do take out the scart lead form ur eurovox and tv

connect a coxial cable from the back of ur eurovox to ur tv (a coxial cable is the one u use to connect ur vcr to ur tv )
ok now u have ur eurovox connected to the tv by coxial cable only have ur eurovox on and not in standby but on

now using ur tv remote scan the channels on ur tv do an automatic scan of channels on ur tv u should get to a screen asking for a code the code using ur eurovox remote now is either 0000 or master code 1004
now u will press menu>goto config>cleardata>clear channels>factory default ?choose corrwect symbol rate

once that is done all u do is take out the coxial cable and now ur scart is back on and working

[ddeeguy]

this worked for me

i managed to get box going again. This method didnt work first time.

i had to flash box using april update, then cleared data, etc. Re flashd to latest firmware, re-scanned at it worked at last 1am.

Dont know if my method worked or throwing box about in frustration is reason, .

[macawey]

error of blank screen

[mjamil]

thanks its work!