ppl i need help big time, ive got a eurovox "blue" ive installed new firmware, my box worked for 30secs, switched its self off then came up with 0001 on the display of box, ive wiped the memory clean, put new software on it again, still no joy, ive put coaxial ariel in to it, no joy, put code 1004 in to it, it worked through scart lead, then turned its self off and when i put it back on its got 0001 on the box and is doin nothing, im stressed to the max with this box please help, ive even tried a friends "blue" box that was workin fine at there house, as soon as i put it on in my house the same error came up 0001, can anyone please help me with this problem? can/have VM hijacked my line? and f***ed up my box(s)
-
-
blue
I had the same problem,i went in menu deleted all channels,then reset factory settings,then put new firmware on box,then powerscan and not fast install for channels......it worked a treat for me,gud luck gill83 -
Blue !
Craig 07 - I had exactly the same problem as you and have spent the past few nights messing about reflashing the box but getting nowhere fast. In the end I've done a Factory reset and then reflashed it with the old firmware from 07. Pain in the butt but I'd rather manually input the codes than kill the box altogether !! Good luck m8.Comment
-
What i find strange, is you tried your friends box, and getting the same error, and if your friends box was working before, (presuming he lives in the same area as you) this tells me you do have a signal problem, but if your broadband is still working, then the problem must be on the cable to your box, check back to where the cable feeds your boxComment
-
I think the problem might be that it's a clone. I have a friends that I flashed and it's a clone and not working. You can tell if its a clone by looking into the slots and if the screws are covered in red paint the I'm afraid it's a clone.Comment
-
Plug an RF cable from the TV/Video out to the TV instead of the Scart lead just to see if you get back your Menu and TV channels. I have tried it on a clone tonight just for a test and it worked.
Otherwise revert back to the previous Firmware and wait for a fix.Comment
-
I have flashed a e/v max blue with 30/11/2008 firmware and power scaned with 6952 (for Croydon). Getting only 93 channels to the previous 226. All BBC channels are missing. Please advise.Comment
-
Do A Full Scan
You will need to do a full scan of the full frequency range when u do the power scan, that will give u all channels. Cant remember the exact proceedure, but I had the same problem at some point in the past.
Good Luck
Marc0niusComment
Comment