digivox ireland

[Brett69]

Help guys! I live in Lahinch co Clare need to get my Digivox-t up and running again need firmware or new codes can anyone help. on NTL MMDS

if i have codes how do i install them cos i have been given 2 lines of number sequences do i install 1 line or both lines at the same time?

[caveman_nige]

have you tried any of these

http://www.digital-kaos.co.uk/forums/f10/digivox-firmware-v3200-t-mmds-9770/

http://www.digital-kaos.co.uk/forums/f10/digivox-firmware-au-fixes-30-11-08-a-15393/

[bassman]

I got mine running again, just inputting the new c*des from keym*aster, you should get running again using info attached, they haven't done a new firmware yet as far as I know

[Brett69]

have you tried any of these

http://www.digital-kaos.co.uk/forums/f10/digivox-firmware-v3200-t-mmds-9770/

http://www.digital-kaos.co.uk/forums...ixes--a-15393/

yes i tried reinstalling v3200 and also uk fix but neither worked

thanks for the info.

[Brett69]

I got mine running again, just inputting the new c*des from keym*aster, you should get running again using info attached, they haven't done a new firmware yet as far as I know

thanx bassman will give these a go a little later have to go out at the mo so will let you know how i get on later.

[Brett69]

thanx bassman will give these a go a little later have to go out at the mo so will let you know how i get on later.

hi bassman tried the c*des i have but they do not work any chance you could mail me the ones you used in a PM cheers.

[bassman]

Sorry meant to pm

[Brett69]

Sorry meant to pm

Those were the codes that i had.Tried them twice with no luck.

thanx anyway matey will have to keep looking.

[pudzy]

ok brett, first of all your on cho8us mmds if you live in that area, so input cho8us key code , you must be new to this surfing area

[Brett69]

Thanks,yes I am new to the area but have tried inputting the c*des for both NThell and Ch8rus with no luck.The c*des that are about are they for the Digivox-T or other Digivox models? If you have any other info that you think might help could you PM me please:

[pudzy]

if you have digivox t code for ch8rus code will work, press menu, press system info, type 1969 press nagra , then input code, press ok to save then exit, starts with ce , if you try that one again

[pudzy]

if you have digivox t code for ch8rus code will work, press menu, press system info, type 1969 press nagra , then input code, press ok to save then exit, starts with ce , if you try that one again ,

[wozzo]

Inputting the codes is only temporary, they keys will roll every day or two.


A fix is needed for the terrestrial boxes, one was not made as they dont use MMDS in the UK, so when it hit them 2 weeks ago no such fix was made.

[Brett69]

if you have digivox t code for ch8rus code will work, press menu, press system info, type 1969 press nagra , then input code, press ok to save then exit, starts with ce , if you try that one again ,

thanx your a diamond! worked this time back up and running.

[caveman_nige]

nice work guys, good to hear you up and running again..