8882 error the box super 4

[djwinc]

hi i have error 8882 on my box is there a way to flash this box back to factory set theres no menu screen so a forced flash if possible using the usb port anyone out there with such a program? many thanks


DJ

[caveman_nige]

Try this, but at your own risk.

I found/stole/borrowed this info from elsewhere:
Its eems to relate to a bunch of receivers and stems from a GNU compilation error.


How to recover from 8882 mode


1. Connect RS232 Null Modem cable between PC & Receiver
2. Select Serial port COM 1 Etc Baud Rate Fixed As 115200.
3. Browse the BIN file to download and select File Type
4. Click "DOWNLOAD" first and turn the receiver power OFF/ON
5. After download completed ,wait another 30 seconds more until rebooting finished.

Once you fix your STB make sure you insert the USB stick and make sure you go to USB in your STB make sure that you have the 2 folders made on your USB before you load the BIN . Note not doing this can KILL the STB with the 8882 error.

the file you need is called:
250sm recover.zip

this file is 'not' attached to this post or forum (i am away on my hols at the moment and cannot download to this PC) but if you google it you should find a way of downloading it.. If i can get hold of it later I will add it to this thread for you or maybe somebody else will before me..

Good luck, let us know how you get on..

[jazzylover]

Did it help?

djwinc the community (caveman_nige) took the time to help. Help the community by letting it know if it resolved your problem.

Thanks

Jazzy

[cactikid]

funny i had 8882 on sv1 and digivox,changing channels still same number on front,powered off with remote normal time came up.and when powered up again normal channels resumed.

[martin-f]

1. Connect RS232 Null Modem cable between PC & Receiver

how is this possible on the s/v 4 usb

[Lanxman]

how is this possible on the s/v 4 usb

It's not possible mate, Sorry If you have been mislead somewhere along the line. The only option is to contact the supplier and hope he comes good and changes it for you.

[martin-f]

Sorry If you have been mislead somewhere along the line

thanks for your reply
i was not mislead m8 but newbies maybe

[Lanxman]

thanks for your reply
i was not mislead m8 but newbies maybe

No worries but, Didn't mean to come across as an arse mate, Was just a genuine answer to your question.

[martin-f]

No worries but, Didn't mean to come across as an arse mate, Was just a genuine answer to your question.

no you didn't m8 and it was a genuine answer maybe the post could be edited so not to confuse

[kendo]

hi joining thread just wondering if it is possible to jtag starview4 usb with 8882 prob or is it not same as the 3 inside kendo

[mahabad1972]

connect usb rs232 to laptop to solve 8882

hi i was wondering if anyone could help me about (one of usb device attached to this computer has malfunctioned and windows does not recognize it for assitance solving this problem check this message) keep says flash update failed and i get this error after that

thank you

[Time2Play]

I found/stole/borrowed this info from elsewhere:
Its eems to relate to a bunch of receivers and stems from a GNU compilation error.


How to recover from 8882 mode


1. Connect RS232 Null Modem cable amd a Max232 cable found on ebay between PC & Receiver
2. Select Serial port COM 1 Etc Baud Rate Fixed As 115200.
3. Browse the BIN file to download and select File Type
4. Click "DOWNLOAD" first and turn the receiver power OFF/ON
5. After download completed ,wait another 30 seconds more until rebooting finished.

Once you fix your STB make sure you insert the USB stick and make sure you go to USB in your STB make sure that you have the 2 folders made on your USB before you load the BIN . Note not doing this can KILL the STB with the 8882 error.

the file you need is called:
250sm recover.zip

this file is 'not' attached to this post or forum (i am away on my hols at the moment and cannot download to this PC) but if you google it you should find a way of downloading it.. If i can get hold of it later I will add it to this thread for you or maybe somebody else will before me..

Good luck, let us know how you get on..

hi guide was write just missing one vital peaice hope this helped plus i have all 8888 error what does thaqt mean


or yea you connect the max 232 caqble to the inside of the starview box just behind the usb port there is 4 pins to plug in to

[leemiff]

help!!!! starview the box usb

hi guys just got this and not sure what im doing,wont do anything just says 8882 on the led,how do i solve this?can it be fixed? cheers for any help