With nagraedit you'll need to use a phoenix card programmer.
-
D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it. -
nagraedit
cheers m8
i got all the tools but carn't use them i'll let you know how i get onComment
-
nagraedit
hi sicilian
got my phoenix programmer up and running but when i try to make a backup of the card i get this
Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful
i know the prog working i've done funcards with itComment
-
Which phoenix programmer do you have?
Have you inserted the card with the chip facing the correct way?
Try lightly cleaning the chip with a eraser, remember lightly
D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it.Comment
-
nagraedit
the programmer is the infinity usb phoenix compatibleComment
-
fatlad you have a real problem if get no atr in nagraedit. your card is potentially toast and an unlooper aint no good. try running it through mrom or i believe you could use atr resurrection (never used this myself).Comment
-
Check all your comm settings if your still not getting atr. I'd say it one of your comm settings, becuase you stated earlier in the thread that its says paired on the box's eng menu.
Do not use mrom if you need the details off the card.D I S C L A I M E R My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it.Comment
-
Hi fatlad did u set ur infinity to phoenix mode top right corner of ur proggy software click on phoenix and set it to 3.58 and in nagedit click reset card and it should give u an atr string, if not u could try and repair the atr but thats another topic dont bin the card just yet take ur time is the best advice wen u hit a prob like this and maybe write down everything u do so u can look back on it see how u goComment
-
fatlad agree 100% with red devil dont throw your card away.
just trying to point out that you need to get a reading for the atr before you can make progress. try mrom to wipe the cards and obtain an atr reading - successful in my experience. i assume you know the bk and ird and at least can run a card to get your tv back?
post back try my very best to help.Comment
-
Buy mikedatA dual unlooper ?
Good morning. From where I can Buy mikedatA dual unlooper? Thanx in advance. Harry - Greece.Comment
Comment