how to flash a digivox

[GrayBlack]

hi iv got a digivox xl, iv flashed it wih the wrong frimware and CHdl comes off can i fix this?

[supersayan70]

Thanks for the link!!!

[dlcontracting]

digivox flashing

Looking for help to flash my digivox xl anyone

[julio501]

Hi everyone, can someone tell me where to find downloader 10 for digivox t please
thanks for helping.

[cactikid]

go back to second post devilfish,it is in the starview section.

[wolf9]

I recently got a digivox t ch***s mmds, cant pick up any channels version v3.1.1000, is it wrong version do all box's need to be flashed

[gprice82]

HELP!!!! :-)

Hi all, would really appreciate some help.

I have purchased a DIGIVOX XL USB digital receiver, I have downloaded the BIN File,

But how do i transfer the file to the box, I have purchased a USB to RS232 cable but cant do anything to transfer the file to the box.

Your help would be much appreciated.

Thanks

:-)

[cloudnineuk54]

well if using them cables,you will need the loader( down loader10),and make sure the drivers are installed for your usb to null cable adapter,and in device manager on your pc make sure its set to use com port 1,2.3 or 4 no higher...com port in the loader must match the com port setting in your pc settings if using flashing with a usb pedrive as detailed in next post dont remove it or install it why powered on,itll brick it,i personally prefer the null cable way

[darkness.1963]

TO UPDATE WITH USB DEVICE

1 PLUG THE USB DEVICE IN WITH BOX SWITCHED OFF

2 TURN BOX ON GO TO MENU AND ON THE BOTTOM LAST SELECTION USB

3 CLICK OK ON USB YOU SHOULD SEE THE FILE YOU PUT ON THE USB DEVICE SHOWING ON SCREEN

4 HIGHLIGHT IT AND PRESS OK YOU WILL THEN GET THE POP UP OPTION TO CANCEL OR YES PICK YES

5 WHEN YOU SELECT THIS YOU WILL GET ANOTHER SCREEN WITH THE DOWNLOAD BAR ON IT

6 IT TAKES A FEW SECONDS FOR ANYTHING TO HAPPEN SO JUST LEAVE IT DO NOT PRESS ANYTHING ON REMOTE

7 DO NOT DISCONNECT FROM THE POWER EITHER WHILE IT IS UPDATING

8 AFTER THIS IS FINISHED THE BOX WILL REBOOT JUST LEAVE IT AND LET IT DO IT

9 AFTER YOU SEE THE MENU AGAIN GO TO INSTALLATION AND CHOOSE PROVIDER AND SCAN THERE ARE ONLY LETTERS HERE

10 AFTER IT HAS SCANNED FOR THE CHANNELS GO TO MENU SYSTEM INFO AND PRESS OK THEN 1004 ON K*y PAD TURN K*y ON

11 EXIT TO MAIN TV AND ALLOW THE BOX TO UPDATE

12 TO GET THE CHANNELS ON TO THE CATGORIES LIST PRESS THE RED BUTTON AND PUT THE BOX IN STANDBY FOR A SECOND

THEN TURN ON AGAIN WHEN YOU TURN BACK ON YOU WILL GET A BLANK SCREEN AND 4 - - - - ON THE BOX DISPLAY THIS IS

NORMAL SO DONT GET ALARMED JUST LEAVE IT THEN THE CHANNELS WILL COME ON


hope this helps m8

[gprice82]

Hi mate

get to the point where you say to search by provider.

My box gives me options of t,n,e,o,c,cc

I am with virgin.

which one do i use???

thanks in advance

[gprice82]

I HAVE TRIED THEM ALL AND GET

NO NEW CHANNELS FOUND??

WHAT AM I DOING WRONG????

#

[cactikid]

is your coaxial into cable input?have you flashed the box.

[smiler12]

digivox

does it really work

[mark8393]

does it really work

it worked when post was made, over a year and a half ago, but not now