ALL loaders in 1.

[wilhelm]

Hi Guys,

Got null modem cables and logilink usb controller set up the driver and computer has enabled it.
when i connect to the box at rs-232 it is not reading the box.haVE CHECKED AND COM 3 IS = TO COM 3 ON FIRMWARE DOWNLOAD!!

ANY IDEAS ON HOW TO GET THE BOXSUPER TO OPEN ON DESKTOP..

Help guys ???? would be good

[wayneneary]

Doesnt work for me!

No folders extracted, just a folder called loaders and a white application box inside which when clicked runs some sort of script and then failure notice.

Looks well dodgy if you ask me?!?

[EAMO 2]

[QUOTE=wilhelm;255302]Hi Guys,

Got null modem cables and logilink usb controller set up the driver and computer has enabled it.
when i connect to the box at rs-232 it is not reading the box.haVE CHECKED AND COM 3 IS = TO COM 3 ON FIRMWARE DOWNLOAD!!

ANY IDEAS ON HOW TO GET THE BOXSUPER TO OPEN ON DESKTOP..

Easiest way ; use G-trom super_8.04e. The bin file is contained in the
loader. If you have with 9-pin com port use only null-modem lead. all
Stavu boxes are very slow to flash using Usb-9pin, about 12 mins. With
9pin only takes about 2 mins.
All in one loader is very handy, but makes it easier to err, & if it's giving
you bother use the conventional loaders.
I hope author doesn't think I'm detracting from his endeveours, as I'm
sure it took more than one sitting for him to iron out any glitches in his
all-in-one-loader.

[taz10]

Doesnt work for me!

No folders extracted, just a folder called loaders and a white application box inside which when clicked runs some sort of script and then failure notice.

Looks well dodgy if you ask me?!?

same here wont work i'am i missing sumit