Can quality of splitter make a difference

[barryls]

29% signal causes channel loss?

Thanks yeh, I installed an OpenATV image 6.0 and the 29% issue disappeared. Thanks

Hi

I have a ZGemma H2H with Openvix - only getting 29% signal too. Losing some HD and SD channels.

Have good quality splitter and cables, and 100% signal to V6 box.

Tried 6db attenuator, didnt work.

Do I need a signal booster?

Advice appreciated!

Cheers

[ASEK]

barry try turning v6 off completely and see if H2H picture improves

[Bann32]

Even the Ftype connector that fits on the end of your cable coax to your receiver can make a massive difference did for me

[digicon]

Sounds like you are using a very old image especially with the 29% SNR problem that bug was fixed many months ago and the latest tuner drivers for the Zgemmas has massively improved there sensitivity, i would first try using an up to date image with the latest drivers

[barryls]

Sounds like you are using a very old image especially with the 29% SNR problem that bug was fixed many months ago and the latest tuner drivers for the Zgemmas has massively improved there sensitivity, i would first try using an up to date image with the latest drivers

Thanks for your help. I'm a newbie to all this but will have a go at it!