New to the Cable Side - Cable Network ID

[gazzeg]

Hi,

Sorry guys I have a few questions:

I have followed the OpenATV-6.1 but not finding any channels
Tuner B selected however totally unsure about the network ID
Signal Test - What should I be looking for.
Splitter - I have the splitter in place with one wire going to the Router and the other to the ZGemma in tuner B RF IN

Any help appreciated...

Thanks

[tab99_uk]

you need to find the correct net id and frequency for your area

[joe516]

Hi,

Sorry guys I have a few questions:

I have followed the OpenATV-6.1 but not finding any channels
Tuner B selected however totally unsure about the network ID
Signal Test - What should I be looking for.
Splitter - I have the splitter in place with one wire going to the Router and the other to the ZGemma in tuner B RF IN

Any help appreciated...

Thanks

http://www.digital-kaos.co.uk/forums/showthread.php/460188-UK-Only-Cable-Net-ID-s-Table

[gazzeg]

Hi,

i have the right NetID now but still not tuning on Bruitforce scan for some reason.

Any ideas

[Hadron]

Hi,

Sorry guys I have a few questions:

I have followed the OpenATV-6.1 but not finding any channels
Tuner B selected however totally unsure about the network ID
Signal Test - What should I be looking for.
Splitter - I have the splitter in place with one wire going to the Router and the other to the ZGemma in tuner B RF IN

Any help appreciated...

Thanks

What box are you using?

You won't get any readings on the signal finder menu until you do a successful scan.

To rule out any problems with the splitter, you could try rescanning with the feed connected straight to the RF IN socket, without going through the splitter.

Are you using a bare bones Open ATV image, or an image such as Wooshbuild or Ipab?