DIGIVOX XL manual key entry

[jhb403]

hi .. could anybody please tell me whats the latest software for the digivox xl (non usb) thanks

[satsmo]

Directly above you in the stickies http://www.digital-kaos.co.uk/forums...u-fixes-15393/

[andyryan24]

Newbie here guys thanks for all the great posts!!! Are these the most recent codes or are there newer ones available??

[jasbo7]

Hi Andyryan24 welcome to dk m8 yes they are as in Satsmo's post earlier. Why not go and introduce yourself to the rest of dk, let the guy's know what your about.

[andyryan24]

Hi Andyryan24 welcome to dk m8 yes they are as in Satsmo's post earlier. Why not go and introduce yourself to the rest of dk, let the guy's know what your about.

Will do mate! Cheers, only i used keymaster v1.2 but the codes are same as already in mine??

[cactikid]

why do you need codes as firmware should update your problem,unless you have a different problem that you have not said.

[mtume]

After entering 1004 and go to Nagravision, there are not 2 fields to enter key numbers. I only get

Provider ID
Key Number
Key Data


Any ideas

[jasbo7]

try this mate it works for me ok

Download keymaster from here- you will need the keys for your provider to get your box working.

http://www.digital-kaos.co.uk/forums/f10/new-keys-here-12850/

You may have to install microsoft net framework to get this working - download from microsoft obviously. Also winrar to extract the file - its a free application which you can get from rar labs. Just right click and extract keymaster to your desktop.

Once you have the keys use remote.


1) press menu on your remote
2) go to system information and press 1004. A hidden menu will pop up which from top to bottom should say, Nagravion, Set default key, Key EMU.
3) make sure Key EMU is ON
4) next go into Nagravision
5) using the remote input the keys and make sure you press OK to there will be 2 keys to enter so make sure you do them both.
6) exit back to tv and that should be you.

[carlazar]

I have same problem!

[mtume]

Managed to enter both keys still no joy in getting box to work.

[jasbo7]

it should work m8....are you sure you have the right keys for the provider in your area...and then scan....also save both when entered and make sure the emu is turned on

[mtume]

This is what i have done and still no joy.
Put on latest firmware ( no problem)
1) press menu on your remote
2) go to system information and press 1004. A hidden menu will pop up which from top to bottom should say, Nagravion, Set default key, Key EMU.
3) make sure Key EMU is ON
4) next go into Nagravision
5) using the remote input the keys and make sure you press OK to there will be 2 keys to enter so make sure you do them both.
6) exit back to tv and that should be you.

Then done a autoscan, btw my provider is ntl. Am I missing anything?

[jasbo7]

can only think there must be a prob with the cables then m8

[mtume]

Ive got an Arnet frptview and that works fine with the same cables. Im doing this digivox for a mate. Back to the drawing board..

[khuram09]

where do i go to downlaod the latest codes plz help many thanks ??