Original N*L card help

[tushygirl]

does any one know how to program an original ntl card , well it had been programmed by someone else before but when the keys rolled it stopped working, when u put in in phoenix prog it says that it is a wafer card and only has one file a PIC file, so does any one know how to program it or a way to extract the IRD and BK, thanks

[cgscott]

You will need a card reader/writer plus some fofttware that willextract the information the it can be programmed and written.

You best bet would be to get someone to do it as it can be a bit complicated.

[tushygirl]

ive already got the programmer (phoenix) just need to know which softwares

[Curious123]

You will need the latest flash file and Nagraedit 4 to program your card.

[tushygirl]

ive got nagra 4.1 but it says error when trying to open backdoor or something like that

[tushygirl]

do u guys think that the n*l card has been burnt out becuase its sort of a brownish colour on the exact oppoiste of the card (not on the ship side, but the said that says N*L), becuase i tried saving the hex and then using boxkeyreader but i only got F and 1 for the IRD and BK but mainly F's does it mean i have to get a new card or what??

[bugaloo41]

tushy most of the rom cards are burnt a little around the chip. if your rom went down it could be fried but you would normally get the message atr invalid. This would render your card useless. every chance the person who has previously done you card has blocked it or put a password on it hence it returnin ffff or 1111.

i take it you dont know your box or ird? check the bottom of the box you might be lucky.

[bigfella9]

anyone know wer i can get the latest flash file and Nagraedit 4 to program my titaninum 2 or fun card ,thanks

[johnnybutch]

tit 2 files

working tit2 files attch and latest fix..

[Donnie Darko]

You need to read it in phoenix mode,more than likely dates expired and highly probably a blockered image to which the trader/someone who knows what they are doing can get in.
You could glitch it but not for the novice.

[tushygirl]

when i try to read the card with nagra 4.1 i get the following message and it doesnt open the card:

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 36 44
ROM Revision: 010
EEPROM Revision: RevA86
ProviderID: 5C
CamID: XX XX XX XX
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Reading ROM10 failed
Closing of COM1 was successful

does anyone know what this means

[Mackem]

when i try to read the card with nagra 4.1 i get the following message and it doesnt open the card:

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 36 44
ROM Revision: 010
EEPROM Revision: RevA86
ProviderID: 5C
CamID: XX XX XX XX
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Reading ROM10 failed
Closing of COM1 was successful

does anyone know what this means

I would say as Donnie Darko, needs glitching!!!!

[tushygirl]

so do i have to buy the T911 glitcher or are there other ways of doing it.

[mo.p]

so do i have to buy the T911 glitcher or are there other ways of doing it.

yes m8 u need t911 glitcher

[bugaloo41]

Tushy not sure that a t911 is the best for glitching Rom10 A86 - infact it seems to be one of the worst!!

The indications seem to be

TMC Powersync unlooper all the way. Use with TBC Script PTB47.

Ubomb from jabs place; or

Mike datas dual unlooper - more expensive.

Hope his helps.