itgate TGM 220 IMG NOT WORKING IN FTP

[asky19]

I have huge problems with this receiver before it was blocked with 4 dashes now put a boot and I managed to get it started I put the edg nemesis 4.4 only the root pass does not match the pass being dreambox then I saw that the door firmware edg in the plugin tuxbox commander went on var / etc and passwd and I reset the pass with a code found online within telnet and now I changed pass in dreambox why not had more than just ftp port 21 or not I enters and gives me error 0500 or similar I do not know why and I 'm puzzling really wanted then load a new img decoder for this and I find none around they forgot this decoder instead to find img tgs220 you can help me out ? I can not put it emu setting it can work only in root telnet but I can not operate as emu I need to put the ccam Tivusat
How can I reset the pass ftp ? thanks for the valuable answers good Sunday

[mept1]

factory reset,then change password from blank(default password) to one of your choice with itgate control centre

[asky19]

factory reset,then change password from blank(default password) to one of your choice with itgate control centre

I'm sorry but I do not understand I have already reset pass from tuxboxcommander but only telnet access I 'm interested in joining ftp can be reset by holding down the button of the receiver and making the reset but can not enter the same I explain better?

[mept1]

I think i understand what your saying ...There's an error somewhere so I would start from the start with factory reset

[asky19]

but the reset I did , however, ' is always the same I do not know what to do and if there is an img I can use for this decoder

[mept1]

Try here...... http://www.digital-kaos.co.uk/forums...ghlight=itgate

[asky19]

Try here...... http://www.digital-kaos.co.uk/forums...ghlight=itgate

Thanks I did it alone , then the problem was that with all img I rode that I could not access it in telnet and ftp it to only the commander could enter ONLY in telnet I made millions of reset but without being able to enter the decoder as I wanted then I had an intuition that helped me in these three days of hell I've done as follows (for the benefit of those who find difficulty as me) I reset the decoder off again by holding down the top button and after reset are entered in the telnet obviously pass dream was not the right one I gave sending without putting pass and let me in !! then I changed and finally pass it through telnet or ftp can get !! Bad experience skied out crazy : D