kv a780 HELP PLEASE.

[lagerland]

flashed it with 03/01/2011 done all this
1 do a factory reset
2 select automatic scan
3 change provider to telepest
4 change channel type to "networked"
5 start scan (green buton i think)
6 after a few mins a list of tp's should appear
7 chose one nearest your location
8 box should now scan and store all channels.
if there are still channels missing, then you may have a weak signal
Signal should be ok it was with no view conecting to the haringey 1 as nearest 2 me finding all the channels the 1s in black r fine but the 1s blue r scrambled wot am i doing wrong i aint got a clue is there something i have to switch on to get them THANKS IN ADVANCE its doing me head in.....

[craggz]

have you connected the ethernet cable to your router\modem, and to the back of the kv box?

[cactikid]

[ame=http://www.youtube.com/watch?v=LsEvfBnceiM]YouTube - Setting up the Kryptview KV780 Cable Receiver[/ame]

also power off box,modem,router for 30 secs then on to get an ip addy.

[lagerland]

Yeah all conected up mate

[lagerland]

ip addy thats new to me wots all that then only had noview b4 this mate still a bit green

[gadgetfiend]

do a factory reset and try TW 40985.

[lagerland]

Nice 1 r give a try now mate

[lagerland]

40985 haringey yeah done that one mate no joy

[gadgetfiend]

must be a problem with your network, as above reboot modem/router

[lagerland]

Thanks all 4 your help being the stupid F_______ idiot that i am and 1 to many beers i hadnt plugged Enet into the router what a dick a anyway thanks again 4 your help nice 1 have a good day COME ON ENGLAND..........

[cactikid]

ha ha you and a thousand others ,glad your sorted.

[Denzel1219]

kv a780 were get 1

[lagerland]

Just google kryptview mate theres enough people selling them.....