can some body guide me to latetest software for kva750, its over 7/8 months since iv not used it, do i need to flash the box and the iconnector. the last time i flash the file was dated 1/3/11.all the help will be appriciated.
-
-
find file on post 4 for updating on this thread http://www.digital-kaos.co.uk/forums...reezes-243286/ -
thanx for ur reply m8, do i need to do anything with the iconnComment
-
thanx again m8. flashed the box ,factory set,rescanned, powered up but no picture only free to air.i only get 1 light on icoonn. also on my router only showing power but no light going to iconn. power lan.what am i dioing wrong.Comment
-
u take the box and flash it with the file put it back on line with iconn then iconn should update, then go on line and look for new update file and do the norm with it.Comment
-
thanx asek, dont no wether iv flashed the right file iv folowed ur thread, when im cheking the system information it says kv a750 pv.4.1.00. how do i flash the iconn. is it the same as flashing the box.Comment
-
u flash box with file below, u then put it on line with ur iconn attached it should show on tv that iconn module is updating think it goes up to 100 when u see success message go into installation menu and search for new update and follow what u should do netid etc.Comment
-
thanx asek once again,iv done what u said as above great up to then. after factory reset rescanned. trying to update the soft ware it goes up to 99 then stops there.been switching on n off but still same.Comment
-
and u saw module window counting up to 100 when u put it back on line? perhaps u have goosed ur iconn?Comment
-
yes mate ur apall all done,great forum n great people thanx again to all for help.Comment
-
so all cushty
Comment
-
help
i have a problem i update my box using the file A750_FW_V4.01.00_For_ModuleUpdate, but when i connect the iconnector only 2 lights come on and it say module update fail.im stuck please helpComment
Comment