Kryptview remote issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • im_imy69
    Junior Member
    • Nov 2008
    • 22

    #1

    Kryptview remote issues

    Box not responding to the remote, have tried the remote on my friends box and its working ok, green led flahes but box does not respond, on occasions it seems to work but only for few seconds.
  • wilf
    V.I.P. Member
    • Jan 2009
    • 1618

    #2
    If you tried new batteries then its best to get a new remote (about 12quid). i have had to get a couple and have read threads where others have had same probs, it seems that they do go wrong. got mine from tailormadecircuits just email him and he.ll sort you one

    Comment

    • gazza2008

      #3
      also try and reflash ya box again it mite just reset ya remote

      wot krypt do u have btw

      Comment

      • im_imy69
        Junior Member
        • Nov 2008
        • 22

        #4
        kryptview a700c, have reflashed the box aswell but its still giving me the same problem, remote seems to work on another box

        Comment

        • wilf
          V.I.P. Member
          • Jan 2009
          • 1618

          #5
          I know you said it worked on another box but you also said it works sometimes on your box so sounds as though its an intrermittant problem with the remote. have you tried your mates remote on your box? has your box or remote been dropped affecting the angle of the led on either? The green light is not the light that does the work so this may be working but not the led. just to check your remote has a good led get a camera phone put it on camera and hold it over the led on the end of remote press any button on remote and you will see the led flash if its hit and miss then get a new remote
          Last edited by wilf; 25 April, 2009, 14:12.

          Comment

          • im_imy69
            Junior Member
            • Nov 2008
            • 22

            #6
            tried my friends remote on my box and his does not work on mine, i think the box is playing up?

            Comment

            • cactikid
              V.I.P. Member
              • Sep 2008
              • 12017

              #7
              i wonder if remote pickup on box slightly blocked,are u running the latest firmware on box,19/03/09?

              Comment

              • im_imy69
                Junior Member
                • Nov 2008
                • 22

                #8
                yes software is latest, opened the box, everthing seems ok, tried my remote on camera, led seems to flash ok, its deffo the box has an issue

                Comment

                • cactikid
                  V.I.P. Member
                  • Sep 2008
                  • 12017

                  #9
                  maybe try a fresh flash,and recheck any wires blocking sensor on box.

                  Comment

                  • im_imy69
                    Junior Member
                    • Nov 2008
                    • 22

                    #10
                    switched it off overnight and hooray, seems to be working strange........ who cares

                    Comment

                    • cactikid
                      V.I.P. Member
                      • Sep 2008
                      • 12017

                      #11
                      ha ha easy fix

                      Comment

                      • im_imy69
                        Junior Member
                        • Nov 2008
                        • 22

                        #12
                        damn got too excited too quickly, worked forfew minutes, keeps freezin for a bit then works again, have got the latest file, will it make a difference if i were to flash with older file, may be feb one ?????????????

                        Comment

                        • wilf
                          V.I.P. Member
                          • Jan 2009
                          • 1618

                          #13
                          i would give the 24/2/09 a go i have that installed on mine and works fine i didnt update to the 19/3/09 for that reason

                          Comment

                          • im_imy69
                            Junior Member
                            • Nov 2008
                            • 22

                            #14
                            seems to be working ok since yesturday eve, without doing anything, strange but who cares

                            Comment

                            • wilf
                              V.I.P. Member
                              • Jan 2009
                              • 1618

                              #15
                              thats the second time you posted that m8 in this thread, hope it stays working for you tho, dont count your chickens just yet. It still seems to be an intermittant fault with your remote.

                              Comment

                              Working...