If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Pressing OK to view channel list then pressing "Back" crashes box. Hard reset required.
Trying to use Timeshift with an unpowered HDD caddy crashes box. Hard reset required.
Trying to use Timeshift with a flashdrive leaves an icon on the middle of the screen till it's switched off (Unuseable for me)
AV Setting doesn't save, defaults to 1080i.
EPG won't go past midnight on "Daily" view
EPG Won't go past current day in "Weekly" view (Ergo can't go past midnight at all)
More often than not the information bar won't go away on it's own OK-OK required to get rid of it.
In case it's helpful;
I can confirm that my box also crashes when pressing "back" after hitting OK for channels list.
I have the same problems with the EPG and have also noticed that when you go past midnight the mini guide that appears everytime you change channel or press info shows the info for the previous day and not for the day you are now in. Putting the box into standover seems to sort this.
Also another small glitch is that when you press info twice to show programme info the text is not correctly formatted i.e. it splits up words when it should move them onto the next line.
Have yet to try the timeshift function but managed to record fine using a USB pen drive.
As you say all very minor things considering. Now that I solved my glitching problem with an attenuator it's spot on.
Edited to add: Have same problem with Info bar not disappearing every time, only does this occasionally though.
I can confirm that my box also crashes when pressing "back" after hitting OK for channels list.
I have the same problems with the EPG and have also noticed that when you go past midnight the mini guide that appears everytime you change channel or press info shows the info for the previous day and not for the day you are now in. Putting the box into standover seems to sort this.
Also another small glitch is that when you press info twice to show programme info the text is not correctly formatted i.e. it splits up words when it should move them onto the next line.
Have yet to try the timeshift function but managed to record fine using a USB pen drive.
As you say all very minor things considering. Now that I solved my glitching problem with an attenuator it's spot on.
Edited to add: Have same problem with Info bar not disappearing every time, only does this occasionally though.
Thanks for confirming. It's obviously just little niggles with the firmware then, dare say they will be sorted out in due time. Nothing new noticed today while in use
Easy way of setting a timer to change channel at the beginning of a program seems to be eluding me. I can only do it by going through the menu at the moment which is a pita as I need to input channel and time etc manually. Setting up a channel to record is easy enough.
When using the USB Record button to set a timer when in the EPG it sets all 8 timers to the same setting, rather than just the first available. Therefore if you want more than one timer you need to set them all manually.
Comment