KV A750 + Iconnector help pleasee!! only power light

[cactikid]

ya fixed it well done

[DW190]

this iconnector is wrecking my head could anyone help me please my run light is not on

You could try reinstalling the software. Its in the downloads with the loader.

[Hadron]

Just tried flashing my A750 with the 11112012 file in the downloads section, but it bricks my box.

At the end of the flash, instead of rebooting the box, it just gives a blank display on the box. Switching the box off & on again gives a single green LED in the bottom right corner of the display & doesn't respond to the front panel buttons or the remote.

Downloaded it & tried again in case my download was corrupted, but same thing happened. Had to reflash with 02122011 to get it working again.

Can anyone confirm that the file is working OK?

[cactikid]

i have removed it from downloads as it seems to have a bug,will try and get a replacement soon hopefully.

[cactikid]

new 750 file in downloads and it has been tested and works.

[jamescraig81]

Hi kingdomk

I have the same problem you have discribed, only one light, i-connect not responding.

I bought a new one but wouldnt mind fixing the old if possible - you said the loader is now updated? how did you do this? Do you mean the i-connect is updated using the loader? I cant get anything to happen.

I have the i-connect powerd up, ethernet disconnected, TLM downloader running with the 4.01 file and correct com port selected but when I start I wait for 5 seconds and get download fail.

same thing with my working i-connect.. any ideas where im going wrong?

Be great if there was a tutorail on how to use this loader correctly, ive looked everywhere but doesnt seem to exist.

Thanks!

Thanks your a star!!!

The I Connector loader is now updated using the loader provided. However now the only issue is trying to update the box. Currently the a750 is on v 02/12/2011. Usually I update the f/w from the menu screen.

It seems like the iconnector is trying to update the box but the run light on the iconnector module flashes once then goes off. Then it comes back on after and stays constant. The f/w update page the KV box stays the same and nothing happens.

Can anyone help further,

Thanks guys the help is much appreciated!

Also flashed KV box with 03/01/2012 update loop file. Same sort of issue the iconnector tries to update the KB box goes to 4 lights then drops back to 3 and sticks on that. A few times its stayed on 4 lights, after switching off initially, and stays on that with no progress or luck

SOLVED - Need to have the the i-connector off, press start on the loader, plug the power in, it updates.

I used the 4.01 file which uploaded instantly but made no difference.
I then updated using the 1.04 file, this uploaded after a minute or two, the 2,4 lights started to work again.

I plugged it into the a750 and it began a 'mobile update' after a couple of minutes everything was fine with the broken i-connector.

Cant beleive i wasted 90 quid buying a new one haha.. need another box now :0

Cheers

[ASEK]

90 quid for an iconnector would have been cheaper getting a new 780 and dumping the 750

[cactikid]

90 bloody hell someone said the 780 was 100