I-connector software/ firmware & Loader required

[Raj3sh]

I have a Kryptview A750; since Saturday my I-connector shows only the green power light.
is there firmware just for updating the i-connector not the Kryptview Box. Also is there a separate Loader just for the i-connector.
Can anyone help me with this or send me links to answer any of these questions

Thank you

[DW190]

I have a Kryptview A750; since Saturday my I-connector shows only the green power light.
is there firmware just for updating the i-connector not the Kryptview Box. Also is there a separate Loader just for the i-connector.
Can anyone help me with this or send me links to answer any of these questions

Thank you

Try looking in the downloads.

[Raj3sh]

Dear DW190,

I have looked in the download section, i've even done an advanced search; and Nothing comes up.
I've even followed this link
Here is the link for the download:
Digital Kaos - Downloads - Iconnector software and Loader

which leads me to the latest Kryptview software situated to the right hand side of the page Kryptview_A750_27052013
which is already installed onto my Kryptview A750 Box.

I also have the Downloader tool which enabled me to do that.
What I need is the Software/Firmware and the loader tool to flash my I-connector, because it's only showing one green power light
Please can you help; Thank you

[DW190]

Dear DW190,

I have looked in the download section, i've even done an advanced search; and Nothing comes up.
I've even followed this link
Here is the link for the download:
Digital Kaos - Downloads - Iconnector software and Loader

which leads me to the latest Kryptview software situated to the right hand side of the page Kryptview_A750_27052013
which is already installed onto my Kryptview A750 Box.

I also have the Downloader tool which enabled me to do that.
What I need is the Software/Firmware and the loader tool to flash my I-connector, because it's only showing one green power light
Please can you help; Thank you

I-conn software - Downloads - Digital Kaos

I-conn Loader - Downloads - Digital Kaos

[cactikid]

make sure you have a good working lan cable,2 others did not

[Raj3sh]

Dear DW190,

Thank you so much for the last two links.
I've extracted both files:
1. Software (bin. file)
2. Loader (module updater.exe file

Ive flashed my A750 many times before with every update; the latest being a couple of days ago with Kryptview_A750_27052013

But I've never flashed my i-conn. What it be too cheeky to ask you if there are step by step instructions or a link on how to flash the firmware onto the i-conn; so i know what connects to what and what to do.


Many; many thanks again

Big respect to you

[Raj3sh]

Dear cactikid,

Thank you for that information. is there a link to instructions on how to flash the i-conn. As mentioned before I've flahed my A750 with firmware; but never my i-conn.

Thank you once again

[DW190]

Dear DW190,

Thank you so much for the last two links.
I've extracted both files:
1. Software (bin. file)
2. Loader (module updater.exe file

Ive flashed my A750 many times before with every update; the latest being a couple of days ago with Kryptview_A750_27052013

But I've never flashed my i-conn. What it be too cheeky to ask you if there are step by step instructions or a link on how to flash the firmware onto the i-conn; so i know what connects to what and what to do.


Many; many thanks again

Big respect to you

Connect to computer with rs232 Null modem cable.

1. Run Loader
2. Open and select Software
3. Select correct Port
4. Hit Start


I cant remember if you have the i-conn powered on when hitting start or powered after hitting start.

[cactikid]

never asked or found out what way you do the icomm update,let us know so others can follow.

[Raj3sh]

Thank you for your last post; really usefu information

I followed your instructions

1. Run Loader
2. Open and select Software
3. Select correct Port

Then i was about to hit the start button; and guess what There;s NO START BUTTON on the TLM DOWNLOADER when you click MODULE_UPDATER.exe.

I'm enclosing a snapshot

So close! can you help; Thank you

Untitled 2.jpg

[cactikid]

i dont see a file in there
ok just checked the file it is in rar [compressed] it needs to be extracted first then put into downloader.

[Hadron]

Thank you for your last post; really usefu information

I followed your instructions

1. Run Loader
2. Open and select Software
3. Select correct Port

Then i was about to hit the start button; and guess what There;s NO START BUTTON on the TLM DOWNLOADER when you click MODULE_UPDATER.exe.

I'm enclosing a snapshot

So close! can you help; Thank you

[ATTACH=CONFIG]201449[/ATTACH]

There's something not right with that screenshot. The formatting is all wrong. The "OPEN..." box should be inside the light grey box, next to the empty box showing the file name. Also your desktop is showing through! The start button should be to the right of the light grey box.

[Raj3sh]

Dear Hadron,

Thank you for your post; very informative.
I think my file extractor software is not functioning properly. I used Winzip 17.5, I didn't know it at the time; but this was a trial version, and I don't think it's extracting all the info


Now I'm beginning to think my bin file for the i-conn firmware may be not the full file either.


Could you help me and point me in the right direction (a link perhaps) to possibly getting a good reliable tried & trusted extractor software, that will open bin. files rar files etc.

if you can brill; but if you can't, don't worry; I haven't tried Download.net yet

Thank you Hadron

[Raj3sh]

Dear Hadron,

Thank you for your post; very informative.
I think my file extractor software is not functioning properly. I used Winzip 17.5, I didn't know it at the time; but this was a trial version, and I don't think it's extracting all the info


Now I'm beginning to think my bin file for the i-conn firmware may not be the full file either.


Could you help me and point me in the right direction (a link perhaps) to possibly getting a good reliable tried & trusted extractor software, that will open bin. files rar files etc.

if you can brill; but if you can't, don't worry; I haven't tried Download.net yet

Thank you Hadron

[Raj3sh]

Dear Hadron,
I uninstalled Winzip 17.5, and installed NCH software Express Zip (Zipplus); extracted the MODULE_UPDATER.rar file to MODULE_UPDATER.exe file (1st Screenshot)
Opened the MODULE_UPDATER.exe and got the TLM DOWNLOADER, (2nd Screenshot) loaded the i-conn firmware via the pathway. As you can see my TLM DOWNLOADER is incomplete; No start button, formats all wrong, and again you can see my Desktop through the file?? What am I doing so wrong?? Is it my extraction software that's no good??

Could you or anyone Please send me a Fully working, (with no bits missing) TLM DOWNLOADER via a link or a folder ready for use. I would be eternally grateful.

Thank you

Untitled 1.jpgUntitled 5.jpg