Hi can someone help plz. When I try to update my kryptview through Internet upgrade nothing seems to happen, does this mean an upgrade isn't needed?? The channels are very jumpy and some are scrambled
-
-
or you may have a super hub which may stop box from updating,you may have to flash it manually with usb -
Yes i do have super hub. My other kryptview ( not HD) seems to update fine through internet, but these HD ones seemed to have nothing but problems. thanks for your help. Much appreciatedComment
-
flash it with the new file as that now works through the superhub with later updates.and for others that want to reflash box by usb.
flashing the box
Please follow the instructions below
(1) Format a usb pen drive to FAT32 on your PC first
(2) Then get the file you have downloaded and copy it across to the usb then
(3) Turn the box off at the back and put the USB into the front of the box
(4) Then turn the power back on to the box when the box powers up go to the menu and select Software upgrade press ok
(5) Then allow the box to reboot, after that you will see the cable scan option just scan as with the older box
Ps if you see on screen usb initializing all the time your USB pen has not been formatted to Fat 32
GUYS WHEN SCANNING FOR CHANNELS YOU MIGHT NEED TO SCAN ON ALL OF THE PROVIDERS MAKING SURE YOU FACTORY DEFAULT THE BOX EACH TIME, SO IF NO CHANNELS ON SCAN ON N*l SCAN ON EXCW, THEN TW, AREAS HAVE CHANGED OVER THE LAST FEW WEEKS AND AREAS HAVE BEEN CHANGEDComment
-
Brilliant, thanks. Would you recommend getting rid of the hub and replacing it with another router? if so which one would you recommend?? You have been a big help, nice one!!Comment
-
try it and see how it goes without doing anything else first as previous firmware could not update further through the superhub,yours can now,if you have any issues stick up a post as usual.Comment
Comment