Kryptview - Eurosport now gone like setanta

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • walter_red
    Newbie
    • Jun 2009
    • 4

    #1

    Kryptview - Eurosport now gone like setanta

    Hi all, Had no probs with my OLD kryptview 700c but all of a sudden Eurosport plus GOLD & a couple of others have started breaking up. Setanta went just the same (I know thats gone now) on my box. I've read some posts where people have had no problems with setanta and some that have - I never cured it even after recscans etc & I can't cure Eurosport now.

    Anyone any ideas?? Many thanks for your replies
  • cactikid
    V.I.P. Member
    • Sep 2008
    • 12017

    #2
    are u using splitters if so remove ,sounds like a signal issue.

    Comment

    • neonman72
      Newbie
      • Jun 2009
      • 1

      #3
      hi got a new kryptview and I'm wondering where to get the latest firmware for this I'm in dublin

      Comment

      • windfitz
        Newbie
        • Jun 2009
        • 1

        #4
        firmware

        4shared - free file sharing and storage - share folder - My 4shared

        Comment

        • walter_red
          Newbie
          • Jun 2009
          • 4

          #5
          Originally posted by cactikid
          are u using splitters if so remove ,sounds like a signal issue.
          Thanks, I have got a splitter (always have had but it's been fine until now) I took the cable direct to the outlet on the wall, didn't even use the 'real' ntl splitter for broadband. Did a 'factoy default' reset & scanned again - it didn't pick up eurosport 1 only 2. Left it overnight and 1 popped up but it's still the same. If I change the value in 'signal variation' I can get it a bit more stable but it then throws out loads of the channels that were ok before!

          Maybe the box is nearing it's useful life?? It's not that old

          Comment

          • wilf
            V.I.P. Member
            • Jan 2009
            • 1618

            #6
            try a different firmware, some work better than others i got 13/3/09 on mine all channels working fine, anything from the 28/11/08 is fine to flash on the 700

            Comment

            • Bloat
              Newbie
              • Mar 2009
              • 5

              #7
              Hi,

              I had a similar problem about a month ago (detailed in a separate post) and it turned out to be a signal problem. My upstream power level was 61dbmV and downstream -12 to -14. A quick call and an engineer visit later and I now have no problems with picture with a more suitable 50 upstream and 0 to -1 downstream.

              Comment

              Working...