Kryptview A750 The downloading is not requested?

[Nevt]

Thanks for that but have done all you said, even reloaded maplin driver from this thread which reassigned a new port and still not working, turned on immediatly, also waited 2 seconds as on other threads, really tried all i could find, have been able to flash old starview before with an old home PC with rs232 port but its scrapped now (unfortunately). could it be the adaptor cable, ordered USB to RS232 over net, Should i have ordered USB to null modem ?? is there a difference in 9 pin adaptor cables ?? thanks

[EAMO 2]

Thanks for that but have done all you said, even reloaded maplin driver from this thread which reassigned a new port and still not working, turned on immediatly, also waited 2 seconds as on other threads, really tried all i could find, have been able to flash old starview before with an old home PC with rs232 port but its scrapped now (unfortunately). could it be the adaptor cable, ordered USB to RS232 over net, Should i have ordered USB to null modem ?? is there a difference in 9 pin adaptor cables ?? thanks

The Usb to rs232 is correct cable,as 9pin null-modem is connected to
this & gives crossover needed.
Only working from memory here, It's a while since I flashed a Kreepvu
On loader; Click on CODE SEND
Add bin file (july 09) to loader
Just try this, might work;
Power-up box, Hit START on loader
Power-Off box then Power-On again
If your stuck & can access menu, look for DEFAULT key & click on it.
If You can't find DEF key, find FAC. RESET & click on it.
Now try to flash & double-check COM PORT settings match up.
To check lead try flashing different box with it.
Persevere, You'll do it

[Nevt]

Success

Thanks Eamo for help. I tried local computer shop and bought a reliable (if there is such a thing) USB - Serial lead and it worked first time. Shouldn't really expect anything that costs less than a fiver to work, I guess.
Scanned but only got a few channels, I'll have to scout around threads for correct freq. or something like that, if not I'll be back on. thanks again

[noelmac]

Hi
I am using the STB editor to try and flash the Kryptview A750. I have opened the .bin file changed the com port to 3 which is the port assigned to the USB serial adaptor. I press start, turn on the box and after a few seconds I get the message on code send " The downloading is not requested".

The instructions I received with the box tell me to use the remote and press the red button twice and then stanby after pressing start on the downloader. This doesn't work either.

The box shows four green zeros.

Please help. Why do these things always happen to me. I should be at home building furniture. The mrs is not going to be happy. Better give her a ring.

when you click download switch the box on at same time from the switch at the back of the box this worked for me noelmac

[steopower]

i had the same problems.the second you click start double click red and standby,it worked for me but i had to be quick

[janner66]

Quicker the better

Yeah looking back on my problem I had a suspision it might be the way I pressed the red buttons in sequence. If you are still getting the download not requested just perservere and try different combinations on the remote. It sounds like the quicker the better, so I really wanta see those fingers!

[mtume]

Finally got my STB to work after getting the "The downloading is not requested"

Any one getting the problem, try

1. Start up STB
2. Press RED, RED
3. Press Standby.

Should work!

[1michael1]

none of above worked for me,sent box back to supplier and they replaced it!

[razorsharp]

will try that driver, thanks

[nims.topiwala]

The downloading is not requested

The downloading is not requested

[ravanoli]

DNR

Having the same problems. I will try new drivers in my adapter,then a new one then a P.C Help

[davidbackham]

i am using usb adopter with null cable it says "Download Fail"

[bees2000]

re download the software and try again

"download not requested" has a different solution than
"download fail"

you may get better feedback posting a new thread
this one is old

[amit chauhan]

can i flash the new firmware of the kryptview A750 with a VGA cable.

[cactikid]

no it has to be a null modem cable