update

[dianered]

Hi all my kryptview A780 has been on and off for the last 3 days??? I try every week to see if it needs updating but it always say already updated but now when i go to update it just said searching for update the only thing is its been about half hour and still the same??? Any help with this or is somethink going wrong?? Any help at all!?? Thanks all

[cactikid]

no update ,aug 2013 is latest,maybe servicing working their end or upgrades??

[andy_p]

I have the same problem, I was going to purchase a 2nd box but am wondering if I will be able to get it working once I flash it without the upgrades working ?

Any advice guys ?

Thanks in advance :-)

[ASEK]

well if updating isn't working on there server end then I doubt it, but u wont need it if u can load aug 2013 f/w on in from the start.

[12345guy12345]

I think you can do a box to box transfer,I found this

1- Connect the two boxes with a Null modem cable leaving both boxes switched off by switches at the back.
2- The already flashed box would be the Master and would be connected to the TV, this box should be facing you so as to pick up remote control actions.
3- The box to flash would be the Slave and pointed away from the remote control so it does not pick up the remotes commands.
4- Switch the Master box on.
5- Go to the S/W Send, INSTALLATION-0000-DATA DOWNLOAD-S/W TRANSFER SEND, and press OK
6- Switch the slave box on just after you pressed OK above and then you should see the data copying from good box to box to be flashed, when complete box should reboot and be flashed.

I have not tried it because I only have one box but somebody might have