No network Id after factory reset??

[maca]

http://www.digital-kaos.co.uk/forums/showthread.php/460188-UK-Only-Cable-Net-ID-s-Table

[cactikid]

i cant see the logic if your vm box gives you your netid and frequency and entered into kv and manual scan you get 0?

forgot to add anybody also with a working 780 get info off your working channels and input into a factory reset and note your results,provider etc and qam?

[boodykaka]

Has anyone had any luck with this?

[cactikid]

yes thanks for asking

[boodykaka]

do tell m8

[boodykaka]

Got it working got uddingston back not sure how because of all the trial & error so if anyone wants me to email the channel list pm me

[cactikid]

did you do what i said before enter all info from vm box and manual scan.?

[Wellinever]

Delighted to report I got it back as well!. Tho had to do multiple delete all channels and rescans. Not factory default.

I also added the following TPs.

131.00 6952 256
131.00 6952 64
131.00 6952 128

It came through after I added the last one Dundee and Edinburgh were there as well. No idea if it was the TPs or just multiple rescans that did it. Or pot luck!

Off to the pub!

[cactikid]

you see what you have posted now? a new qam 128, a very well done,wonder if all info and qams are in the vm box.

[Wellinever]

This is the exact order I did everything when it came back, as I say no idea if it was the tps or multiple rescans or just pot luck so beware you may have to try different frequencies or multiple times to get yours back.

No factory default.

1. Delete all channels.
2. Manually add tp 131.00 6952 256
3. Network scan for my area, my netid did''t show so I selected a random net id then stopped the channel search before it found any channels by pressing the red button.
4. Back out and delete all channels
5. Manually add tp 131.00 6952 64
6. same as step 3
7. same as step 4
8. Manually add tp 131.00 6952 128
9. network scan for my area and my netid appeared along with Dundee and Edinburgh were there as well, and a few others.

I also had my superhub turned off for a few hours/disconnected and had tried multiple factory resets and rescans but all I was finding was the same 18 netids. Only when I added the tps did the others reappear.

My net ID is 90984 an my area is telewest which is why I stared with 131.00 as this appears to be the first frequency that is searched when you go into network scan for telewest.

Good luck

[cactikid]

possibly crafty blighters had changed tp and qam with that info so box would not find it.

so now uk use 64 128 and 256 qams it seems.

[trevor1969]

possibly crafty blighters had changed tp and qam with that info so box would not find it.

so now uk use 64 128 and 256 qams it seems.

How do I change the above info on my box mate please

[cactikid]

you can only change it in when inputting data into manual scan,hit the right number and all data will show as above.

[Wellinever]

How do I change the above info on my box mate please

To add a tp on the a850

Installation Menu
Cable scan
Manual Search
yellow button to add tp
add frequency by typing in the number then hit down arrow on remote
add symbol rate by typing in number then hit down arrow on remote
add qam by scrolling through the various options using left and right arrows
hit ok to save tp then back out and do a network scan after deleting all channels if you haven't done that already (not factory reset)

this is to find a missing net id so you may have to find the right frequency to change for your area by trial and error. try adding the tps you have already but change the symbol rate and qam to 6952 and 128 as per my previous post.

[trevor1969]

Can I only change it when I do manual search as I did a fac reset last week I now get hardly any channels . If I change it can I still do auto search