Transponder problem

[MB2008]

I've flashed my kryptview with latest software, did a factory reset and searched for new channels but nothing. I'm on the wrong transponder, I should be on 6.952 but its set on something else. any ideas?

[wilf]

just do a search on the correct provider for your area, basically who ever provided you with cable before vm, then you will pick up correct tps!

[MB2008]

I'm on vm. I flash the box and do a search it automatically picks up 6.887 and I get no channels when searching. Is there no channel files i can send to the box like u can with eurovox?

[wilf]

we all on vm now mate you need who supplied you before vm? ntl,telewest or whoever. just post the nearest big town to where you live if you dont know. there is some files out there somewhere but its more than its worth to br honest. they are not needed on kryptview as this box auto puts them in order and catorgaries aswell

[MB2008]

Sorry mate, ntl it was previously. But i select that and it automatically uses 9.887 to search for channels and finds nothing

[wilf]

have a look here and find on the list where you are and scan on that network, http://www.digital-kaos.co.uk/forums...ble+area+codes you should be finding some 34 tps when scanning, have you checked the system info to make sure you have flashed the correct firmware to the box

[MB2008]

I've got correct software on. It says i should scan with TW on that site. I tried and still no channels. When I search on NT L I only get 8 tps and no channels, it searches on 9.887 when i know it should be searching on 6.952

[DW190]

I've got correct software on. It says i should scan with TW on that site. I tried and still no channels. When I search on NT L I only get 8 tps and no channels, it searches on 9.887 when i know it should be searching on 6.952

Just try different ones near to your area.

[MB2008]

no luck

[khan]

hi mate

i dont know if u typed wrong but ntl is 6887