A750 + IConnector 03012011 Firmware

[EAMO 2]

Did it a number of times with different f/w. The i connector still is not doing anything. Just the power light stays on. The other lights do not flicker or come on. Box has got freeview channels on it. Is there a way of flashing just the i conn?

What diff f/ware did you use, I hope it was A750 f/ware
First plug out router, box & i-connect.
Plug in router & box, wait, then plug in I-connect.
If nothing happens try s/w update in box menu
If it updates i-connect should kick in & install update
If it's still not responding, disconnect i-connect, & fac-reset box
Flash box with 03/01/2011 f/ware, then scan for channels
Now connect i-connect & leave it update itself.Reboot router & box
If you're still in trouble Alex, Cacti, or Satsmo might be able to
help you, or you could ask question on i-connect facebook page
Just say i-connect lost lights don't mention pulling out plug
while flashing. You might just check LAN-cable to make sure it
wasn't damaged or try in diff port on router

[nokias]

Thanks I really appreciate your help. I will give it a go tomorrow. I flashed it with older f/w from last year to see if it made a difference. I think it was last May's update that updated the i-conn. LAN cable is fine as I was using it on sv7 (which has gone down) so I thought i would try reconnecting the a750 back. All f/w is a750.

[EAMO 2]

Thanks I really appreciate your help. I will give it a go tomorrow. I flashed it with older f/w from last year to see if it made a difference. I think it was last May's update that updated the i-conn. LAN cable is fine as I was using it on sv7 (which has gone down) so I thought i would try reconnecting the a750 back. All f/w is a750.

Once you used 750 f/ware it's OK. The worst thing can happen to
a box is a power cut during flash & you did it to an i-connector.
Hopefully it will be alright. Just try SV7 on LAN cable & see does
router LED light up

[nokias]

SV7 connects fine, the server is down on that. I have reflashed a750 and i conn still doing the same thing, just one LED light (the power light).No connection light or anything. Does anyone know the Jtag points or if I can reflash it via RS232 (just the i conn). Box flash if fine updates and downgrades without problem. Even tried A780 on the LAN cable and that's fine.
Maybe it's time to move to A780, A750 and i conn have been going just over a year.

[cactikid]

interesting if it was just the power cable or iconn that got a pull also,have you tried powering off at back modem router and box for a few mins then on and leave it on a scrambled channel for a few mins.

[EAMO 2]

interesting if it was just the power cable or iconn that got a pull also,have you tried powering off at back modem router and box for a few mins then on and leave it on a scrambled channel for a few mins.

C'mon Cacti, you can do better than that. It seems i-connect not
connecting with router. Maybe supplier will replace unit

[todgerman]

cool great action

[EAMO 2]

Simple question what does this new firmware do compared to whats already on the box? regards Roger

Simple answer1, KV recommend you use latest firmware, you
either trust their know-how or you don't.I know I would
Simple answer2, if your box works fine leave it alone, if it's not
working fine update firmware.

[nokias]

tried everything so far. Different f/w, switching router/modem off. The i conn just comes on with one single light (the power one) left it overnight and nothing. Seems like the i conn needs reflashing or jtagging. I have jtagged a few sv's in the past but have no clue about the jtag points and what to flash it with (the iconn that is)
If I could just flash the i conn with rs232 , would make so much easier.

[cactikid]

replace or recharge you,contact your supplier and see if they will replace it as it stopped working,trouble is who might have any.may need powering on/off a number of times?with latest firmware and you did a factory reset and new scan.

[brainwave]

here m8 try this firmware below on your box then use the one on the net to update it after that.
Kryptview_A750_09092010.bin - 4shared.com - online file sharing and storage - download

menu ...... installation ...... 0000 ....... s/w update try that and see what happens.

if you get the firmware on the box and still not working reboot the box a few times and it should kick in.

[EAMO 2]

here m8 try this firmware below on your box then use the one on the net to update it after that.
Kryptview_A750_09092010.bin - 4shared.com - online file sharing and storage - download
menu ...... installation ...... 0000 ....... s/w update try that and see what happens.
if you get the firmware on the box and still not working reboot the box a few times and it should kick in.

He has no bother flashing firmware to box, he's after trying older
f/ware already. His problem is i-connect won't kick in to update
No connection LED on unit.

[cactikid]

ok i have i read back,you dont flash the iconnect,you flash the box with firmware and iconnect is removed from unit and powered off,did the iconnect get a bang or something and all pins in place.?

have you powered off box at back then on a few times as you have not said.?

[nokias]

ok i have i read back,you dont flash the iconnect,you flash the box with firmware and iconnect is removed from unit and powered off,did the iconnect get a bang or something and all pins in place.?

have you powered off box at back then on a few times as you have not said.?

yes powered it off many times and back on again.
I have txt the supplier but he has not got back to me.
It just seems like it's stuck. I have a bit of knowledge on these and a780 but no one (even my 2 suppliers) have ever encountered this.
If i can get another i conn I will try or get this one repaired. But seems like I will have to go back to sv7 or get an
A780.
Iconn did not get a bang just power cable pulled out while it was updating after flashing it with recent f/w . The box was flashing iconn (led was blinkin) when I put power back in i conn , just the power light came on

Thanks for all ur help. I tried it all but to no avail.

[brainwave]

yes powered it off many times and back on again.
I have txt the supplier but he has not got back to me.
It just seems like it's stuck. I have a bit of knowledge on these and a780 but no one (even my 2 suppliers) have ever encountered this.
If i can get another i conn I will try or get this one repaired. But seems like I will have to go back to sv7 or get an
A780.

Thanks for all ur help. I tried it all but to no avail.

you cant repair them impossible sorry to say !!