A750 + IConnector 03012011 Firmware

[EAMO 2]

you cant repair them impossible sorry to say !!

Many things are difficult, few things are impossible

[marty32]

can we use this update on the a780 box

[cactikid]

no dont,both boxes have their own file,and you can update over the net once the box has been originally flashed by null modem cable.or usb .

[k115h]

Have you tried to reflash the A750 after the problem, this may be the probem. Also can someone post the download link for the flash loader.... thanks in advance

[bitchmonkey]

am i right in thinking that without the iconnector i would not be able to use the 750?

[badapple]

am i right in thinking that without the iconnector i would not be able to use the 750?

You are correct. The iconnector is needed to connect box to KV server.

[Akshay7395]

Kryptview A750 + IConnector latest firmware 03/01/2011

Digital Kaos - Downloads - Kryptview A750 03/01/11

Please be advised that if you upgrade your A750 with the 03/01/2011 firmware, make sure your IConnect is powered OFF when doing the new channel scan.

Only reconnect it and power it back up again once you have a TV signal displayed on the TV (Usually channel 0000).

Once you power up the IConnect, it should take over the A750 and download a major update from the internet. This is normal and should be allowed to proceed (display shows on both the TV and the A750). Once the A750 display shows the word SUCC it is complete and you may now use your IConnect in the manner in which it was designed.

If you get the above wrong, the IConnect will sit there and only display 2 green LED's (power and connection). If this is the case, re-read the above and you have to start from the beginning (re-flash).

what comes in this new update

[alex123]

what comes in this new update

et
extra server if you dont use dont use it you may get glitching

[scotty180]

I have Same Problem as nokia but i didnt have a power cut at all i took off iconnect flashed box and done about everything said here But its like the iconnect dont see my router or my router dont see the connect

[DW190]

you cant repair them impossible sorry to say !!

I repaired one some time ago when the software had gone corrupt.

I didn't have a brainwave at the time just the software and loader for it.

[scotty180]

Hey Do u have the software and loader for the Iconnect?

[DW190]

Hey Do u have the software and loader for the Iconnect?

Yes but it cannot be released generally.

[wars]

Thanks for posting this, a friend has asked me to update his box and he has been emailed a firmware but doesn't have the loader so hopefully I will be able to download it from here! If it's a different firmware than you have posted I will upload it (if the flash goes successful!)

[wars]

Turns out it was the same one he was emailed. Flashed it and the channels have started coming back now. Thankyou!

[Striker10]

Hi guys,

My iconnector stops at lnk at the minute. Do I need to update? Been out of the loop somewhat