A750 + IConnector 03012011 Firmware

[razvi087]

Flashing iconnector alone

Hi,

I reflashed my A750 with the latest update. While the i conn was being flashed , my son pulled the power out. Now the i conn has only 1 solid green led light showing (power) and no other movement. I have left it connected for several hours but nothing has happened.
Anyone know how to resolve this please?

I had the same problem as nokias with only one solid green light showing on the iconnector.
The solution is to actually flash the iconnector with a null modem and a special loader and software.

Here is the link for the download:
Digital Kaos - Downloads - Iconnector software and Loader

Thanks to DW190 for supplying this solution and I can confrim that i now have successfully flashed my iconnector.

For those searching this on oogle I'll put some common search phrases so they can easily find this, As I had a mission

only one light showing on the iconnector
flash iconnector
flash evolution iconnector
iconnector loader
iconnector software

[JBDapper]

Software update

Hi All, just bought an a750 and don`t know where to start I have been told that I need to install the latest Firmware before I can recieve any channels. Any help in this matter will be great, I have all the cables ect but just lack the knowledge of how to complete the above !!!!!

[cactikid]

make sure you have the correct file for box as 750 and 780 are different,in downloads above.
[ame=http://www.youtube.com/watch?v=Q2RbdhH7_b4&feature=related]YouTube - ‪Flashing the KV780‬‏[/ame]
[ame=http://www.youtube.com/watch?v=LsEvfBnceiM&feature=related]YouTube - ‪Setting up the Kryptview KV780 Cable Receiver‬‏[/ame]
files in downloads above

[alex123]

Hi All, just bought an a750 and don`t know where to start I have been told that I need to install the latest Firmware before I can recieve any channels. Any help in this matter will be great, I have all the cables ect but just lack the knowledge of how to complete the above !!!!!

you also need an iconnector to make the 750 work

[np264]

I believe there is an April 2011 update - does anyone else know about this and if som do they know where I can get this update?


Thanks

[EAMO 2]

I believe there is an April 2011 update - does anyone else know about this and if som do they know where I can get this update?


Thanks

Scroll to top of this page & click on box marked DOWNLOADS
Then click on ARNET KRYPTVIEW for MAY fix

[Haz1]

hi, once i have downloaded this, do i still have to do a s/w update via the box itself?

[EAMO 2]

hi, once i have downloaded this, do i still have to do a s/w update via the box itself?

Follow Satsmo's instructions in 1st post of this thread

A750 + IConnector 03012011 Firmware
Kryptview A750 + IConnector latest firmware 03/01/2011

Digital Kaos - Downloads - Kryptview A750 03/01/11

Please be advised that if you upgrade your A750 with the 03/01/2011 firmware, make sure your IConnect is powered OFF when doing the new channel scan.
Forgot to add use May 16 fix

http://www.digital-kaos.co.uk/forums/downloads/arnet-kryptview/31/iconnector-software-loader-1632/

Only reconnect it and power it back up again once you have a TV signal displayed on the TV (Usually channel 0000).

Once you power up the IConnect, it should take over the A750 and download a major update from the internet. This is normal and should be allowed to proceed (display shows on both the TV and the A750). Once the A750 display shows the word SUCC it is complete and you may now use your IConnect in the manner in which it was designed.

If you get the above wrong, the IConnect will sit there and only display 2 green LED's (power and connection). If this is the case, re-read the above and you have to start from the beginning (re-flash)
When complete go to S/W update & it will either update or tell you it's already up to date

[antonyrowlands]

help

i would be very graetfull if you could help me i was sent a file and a loader i flashed the a780 at the end it said it loaded succesfull connected box back to tv and it was blank do you have any idias of what i kan do thanks

[EAMO 2]

i would be very graetfull if you could help me i was sent a file and a loader i flashed the a780 at the end it said it loaded succesfull connected box back to tv and it was blank do you have any idias of what i kan do thanks

If 780 fix used, make sure box is 780 & not 750.
After flash you need to scan for channels
Have a read of this

http://www.digital-kaos.co.uk/forums/f99/kryptview-firmware-loading-guide-tutorial-42524/

[Haz1]

Thanks for your help. Which file shell i use though? The one at the start of the post or the May 16 one?

[EAMO 2]

Thanks for your help. Which file shell i use though? The one at the start of the post or the May 16 one?

Sorry, May 16, latest fix

[Haz1]

So do i only need to use the May 16 file and not have to download the Jan file?

[EAMO 2]

So do i only need to use the May 16 file and not have to download the Jan file?

Yes just use latest fix May 16

[Haz1]

thanks alot for your help EAMO 2. I managed to get it up and running.