First make sure you have the righ firmware like i mention below then go to the menu installation factory default turn the box off at the back then for 1 min then back on again, after this select the auto scan bottom option, then ONLY change the TOP item PROVIDER ONLY from next screen, leave the rest alone and press the green button on the remote, next screen you will get a list of net id's choose the one closest to your area and press ok, LEAVE the box to scan when finished it will tell you to press exit do that.
Third now connect up your ethernet to your box and away ya go, make sure you have your incoming cable going direct to the RF in on the box. First make sure you have firmware 18/05/2010 or 18-06-2010, im sure its in the downloads on here i put the 18-6 2010 on mine and lost my sound so put 18-05-2010 on and now all chanels up and runing.a bloke called brain wave helped me out with mine.hope this helps.i was getting the 8 chanel thing like you.
Third now connect up your ethernet to your box and away ya go, make sure you have your incoming cable going direct to the RF in on the box. First make sure you have firmware 18/05/2010 or 18-06-2010, im sure its in the downloads on here i put the 18-6 2010 on mine and lost my sound so put 18-05-2010 on and now all chanels up and runing.a bloke called brain wave helped me out with mine.hope this helps.i was getting the 8 chanel thing like you.
Comment