Got Kryptview box today but cant get channels

[MILLY.00]

Ive just received my Kryptview 780 box today , everything went okay loading the firmware.

Ive connected it all up and scanned the box , im getting all the channels but when I select them the say scrambled , its showing 56 signal strength , im in St Helens , Merseyside can anyone help me set this up.

Thanks

[Pad578]

I am using Kryptview and i get all chanels my signal is about 77
not sure what acceptable signal strength is but just make sure you are not going through a splitter and are connected to internet.

[peao]

have you scanned in the local network

[MILLY.00]

How do I find what the local network is for St Helens , Merseyside , im connected to the net with a 85mb home plug

[Pad578]

This guide was posted by Barrowmanandrew

just to make sure your scanning properly m8

1 do a factory reset
2 select automatic scan
3 change provider to telepest
4 change channel type to "networked" (this is what i think your doing wrong)
5 start scan (green buton i think)
6 after a few mins a list of tp's should appear
7 chose one nearest your location
8 box should now scan and store all channels.
if there are still channels missing, then you may have a weak signal.

[MILLY.00]

Just done that mate but still getting scrambled or no video

Signal strength is 56

[MILLY.00]

Im getting the normal 5 channels okay , BBC , ITV etc

[Pad578]

Cant think of anything else to try Milly.00 its possible your signal is just too weak

There are other more experianced people on here that may be able to suggest other possible solutions.

Sorry M8 and good luck.

[MILLY.00]

Okay thanks , its doing my head in now my patience is running out

[psats]

Okay thanks , its doing my head in now my patience is running out

if your not getting the free chnls..ie bbc itv your signal is too low
try connecting box direct no feed see if you then get the free stuff

[craggsy12]

hi i had the same problem signal strength 55
got it sorted by changing the feed cable, it must be a good connection.
mines working fine now ( touch wood)

[MILLY.00]

Is the feed cable the one that screws into the back of the box , how do I fix that ? , how do I connect it direct

[Partymad09]

hello all sorry about this lookin im sorry about this question m8 but i live in a flat and im not aloud to put a sly for cs but i have being readin round the net and from wot i have read up on i think this krypt view a 780 well work on vm cs could you please put some light on it and thanks for ur time please pm and if so where the best place to buy 1 as i have read there clones out there

[MILLY.00]

I ran 3 Eurovox's in my house and never had problems with them ?

[barrowmanandrew]

I ran 3 Eurovox's in my house and never had problems with them ?

milly , stupid question, but do you have box connected to interrnet?