Kryptview !

[mentorman]

Hello Guys and Gals , a friend of mine has the arnet Kryptview and he has asked me to come on the forums and ask for help. The kryptviews are excellent boxes and self updated for a long time now but since this latest key
roll it has left everyone stumped. He is wanting to know if there is anyway of manually entering the keys to get it up and running again. I have updated it with the latest software but it still says it is waiting for codes to update etc.
Any help would be appreciated on this matter mentorman !

[arnetdigibox]

how can we get the software

[bugaloo41]

the latest software is here http://www.digital-kaos.co.uk/forums...iew-fix-14249/

Flash this to your box and you dont need to update manually.

[mentorman]

Arnet Kryptview

Hello everyone , just to let you all know i have flashed my friends kryptview and all is up and running again ! Just as a matter of interest, i have flashed my DBOX2 with the latest ROM 7 fix and that has survived 6 keyrolls so that works to. Thanks to everyone input on this forum which makes it the best !

[buster08]

kryptview help

hi can anybody tell me how to go about updating the arnet a700c?

[mentorman]

Arnet Kryptview !

Hi mate , there is a new software out for the Kryptview and it is an auto update firmware and it works as i have done two already . Just download the kryptview loader which looks like a satellite dish . Download the latest firmware which is dated 28/11/2008 . Put them both in a folder on your desktop so they are easy to find. Click on the satellite dish and open the program . You should connect the Null MODEM cable to you serial port on the PC and the back off the krypt box. Leave the box turned off while you do this!
The program when opened has a BROWSE button , click on that and find the image in the folder on your desktop and click on open. The program is ready now to click on download . Turn on the krypt power and then click download.
You will now see a progress bar on the program as it writes the firmware to the box ! Wait until it says complete and always give it an extra 20 seconds before closing down the program and the box may reboot . If all has gone well you should be back to a Factory setting where you have to do a scan and set the box up from scratch ok . Hope this helps BUSTER ? If so please click on thanks in the thread window cheers mentorman

[kaviya]

hi mate,when i try to do the way u said it comes as cant open serial port1.Idont know what to do please help.

[um44rr]

anybody know how to get software update eurovox??????? please help

[buster08]

kryptview

hi can someone tell me where to get the cable from.

[clit-eastwood]

Fleabay............................

[mentorman]

Hello Kaviya , this problem usually occurs when you use laptops with USB to serial crossovers and my friend had problems with his PC uploading the firmware as he got the same results as you with the comport . He uses vista and i use Widows XP and had no problems so far with any type box ! Make sure you have a Null modem cable and not a straight through serial cable . Try rebooting your PC and if still struggling use another PC either friend or relatives etc ! Hope this has been helpful if so please click on the thanks button mentorman !

[haylez83]

hi sorry im new to all this i want to flash my box but havent got a clue were to start what kind of cable do i need and where do i get the download from i opnly got the box last week and cant watch anything as all it says is waiting for code update ???
plz help !!!!

[laptops]

laptops-4u

all the info is on the sticky. just read and follow the instructions. very simple if you follow them all. takes about 2 mins to do.

[haylez83]

sticky?? what does that mean ??sorry im thick

[mentorman]

Kryptview

Hi haylez you need a NULL MODEM cable buy one from any good PC shop or off *BAY . You can get the software and loader from this site under downloads ok . Open up the loader which looks like a sat dish , browse for the image and click on open connect NULL MODEM at serial port KRYPT box and PC. Turn on Kryptbox then press download on software . Watch progress bar until it says complete. leave for 20 seconds before closing down program and disconnecting ok . Then just scan again and bobs your UNCLE .if this has been helpful please click on the thanks button in message box ok mentorman !