Kryptview Fix (30/11/08)

[redsfan1975]

Redsfan, where abouts are you?

It says where I am on the left of the post text, in the northwest, nr liverpool.

Are you local and able to help?

[dropstock]

hope it has all worked for you as it has for me m8

i would advise that you check other treads as i have done to sort out yur channels cuz it seems like you have done the hard work and it is just a case of reseting your tp's for your area - i feel sure someone will be able to talk you through that

Good luck and u are in the right place for this type of help

all channels are back and it seems to be great so greatfull for everyone's help on here!!!

[wooper]

St Helens, thats why I was asking

[redsfan1975]

Wooper you got a pm.

[billymcmad]

Thanks will try and download when i got my 5 posts

[trickytree]

Hi newbie have arnet fix flashed twice still only fta channels any ideas? cheers

[truey]

KRYPTVIEW FREEZ UP

Hi will this latest fix 301108 stop my box from freezing onto number 1 & 6 where i have to switch off at the mains to re-set ?

[brown151]

new here

hi i am knew here so still trying to find my way around

brown151

[truey]

Yeah so am i but its great fun sussing it all out and it looks agreat site m8.

[burtie70]

KRYPTWARE

have successfully downloaded Kryptware software but as soon as I try to open it says adbobe cannot open. which program do i need to open this.

[kev_1963]

i have the latest firmware and most channels work... but some still say waiting for code update... any ideas?

thanks

[fayray93]

not all channels on arnet box

28/11/08 binfile loaded to my arnet box working fine much appreciated.But when i do a scan only about a third of the channels coming through.Do i need to do a factory reset or will this remove new file. cheers

[eagleeyes]

Even i am havig problems, when i start down load and press red button at the top left hand corner of the remote followed by the 2 press of red button half way through remote control its displays message dowload not resqusted.
any help to resolves this will be really appriciated

[yannos]

Even i am havig problems, when i start down load and press red button at the top left hand corner of the remote followed by the 2 press of red button half way through remote control its displays message dowload not resqusted.
any help to resolves this will be really appriciated

Your problem is that you are pressing the buttons on the wrong order.

It should be the red button twice and then the stand by button in the top left corner.

Hope this helps.

Yannos

[ricky-tk]

just joined but can't find the 30/11 update in the download section??? only seems to be the 29/11 , any ideas guys?

is the 30/11 the very latest update?

cheers