Kryptview Fix (30/11/08)

[[email protected].]

Help please?

Help please!! Am i doing something wrong? i keep getting "the download is not requested". Ive followed the steps above but still no joy. Advice and help much needed as im new to this.

Thanks

Hi i am having the same problem as wiccamiss, how did you resolve it?

[peapod]

Eh?

This thread was labelled, 29/11/08 a few hours ago, so where is the NEW fixed update??????

I can only see 29/11/08!

Anyway I was getting download not requested error with my usb to serial cable, so I switched it to a null modem cable and hey presto it worked!

So where is this NEW update?

[trickytree]

Sat dish

still cant find the satellite dish - any idears what i am doing wrong

many thanks

Hi guiness, i nobbed around for a couple of days scratching my head, i got the file, tried null cable, new null cable, adapters still no connection between box and pc what i had not seen on here, is the 'sat dish' is a file called "uploader" which you need as well as the fix file. I googled it and found it quite fast, fix uploaded easy but had to try 2/3/4 times for it to work Hope you get something from this!!
ATB
Trickytree

[bigdel40]

Firmware

Hi can anyone help everytime I try and enter the new firmware into the file box on the loader and start the update it will not let me select the file or enter the file name am i doing something wrong.

[[email protected]]

helo is there new codes for kryptview been looking every were not very good at this

[[email protected]]

Been reading some of your comments getting scared dont know alot about these things how do iget firmwear arnet loader and whaterever

[polly33]

do i need a program to upload from pc to box

[prostreet]

Loading software to KRYPTViEW ArnEt

You will not get any channels until this part has been completed in FULL


WARNING

BEFORE FLASHING WITH THIS METHOD YOU MUST EXIT EASY INSTALLATION (PRESS MENU BUTTON ON THE REMOTE) AND GO INTO THE MENU/SYSTEM SETTINGS/OTHER SETTINGS AND SWITCH POWERSCAN MODE TO OFF!!!

OTHER WISE AS AN ALTERNATIVE METHOD SET UP THE LOADER WITH THE ARNET UNPLUGGED, START THE LOADER THEN PLUG IN THE POWER ON THE ARNET TO START THE FLASH. FUTURE FIRMWARE YOU MAY HAVE TO DO THIS ALL THE TIME


1. Using the RS232 (Null Modem) cable connect the box to the back of your computer.

2. Plug the KRYPTViEW ArnEt into the mains power supply.

3. Make sure The KRYPTViEW ArnEt displays 0000 on the front of the box. Or if you are updating from a working firmware with existing channels just make sure it's switched on (not standby).

4. Double click the KRYPTViEW ArnEt loader (it looks like a grey satellite dish).

5. The loader will open. Click the green download button. Another box will open saying Code Send. Click Open?

6. Click on KRYPTViEW SOFTWARE once, so it is highlighted. Then click the Open button. This file will now appear File box.

7. Click Start in the loader box then immediately press the RED button half way down the remote control TWICE, then the STANDBY button at the top left hand corner of the remote. (Red circle with a line at the top). So its START-RED-RED-STANDBY

The software will start downloading


The display on the front of the KRYPTViEW ArnEt will have a green line going round and round.
Wait until it says Download Success !


Congratulations you have now programmed your KRYPTViEW ArnEt
Now plug it into your TV, Choose your Provider and scan for channels. Then wait for it to update. It may take a few minutes or sometimes longer, up to an hour so please be patient. The EMU is enabled and there is no updating message.

JOB DONE!!!!



Hope this helps all those that need it.
Cheers

Hi i followed your guide and it worked perfect, thanks very much

cheers and all the best

ill now be able to watch all the christmas films .

[trevor1969]

dont get carried away m8 you never know what vm will do in the next few days

[errol]

Latest Software The Best

Hello again peeps,i have the latest firmwire(30/11/08), and i can tell you if you dont have it,you really should,best viewing i have had in alongtime,check it out,and see for yourself.

[yannos]

Hello again peeps,i have the latest firmwire(30/11/08), and i can tell you if you dont have it,you really should,best viewing i have had in alongtime,check it out,and see for yourself.

In what respect is it the best viewing? Better picture? Sound? I have this box in my bedroom and i think it's fine, also have sky hd downstairs and that's amazing.

Yannos.

[k2tba]

Looking forward to getting this download - thanks for the post.

[bobmar]

Hello again peeps,i have the latest firmwire(30/11/08), and i can tell you if you dont have it,you really should,best viewing i have had in alongtime,check it out,and see for yourself.

Hi
I am new to this and just got my new arnet box, which is not working? It has the 29/11/08 firmware on it? should I try the lates??

[bob300]

Can somebody please help, i'm trying to update my kryptview box but "code file error size" pops up when i click ok on the firmware! please help as i have not got a clue!!

[usman]

what is the type of model and the comm type for the arnet loader is it FTA MODEL or OLD MLODEL this is in the box where you send from loader.