quick one please

[theyel2001]

after i put the software on the box do i
1. just put the cable feed in and scan or
2. put the cable feed and the ethernet cable in

????
just wondered
thanks for any help dont want to do it wrong

[alex123]

it dont matter just connect everything and scan

[EAMO 2]

it dont matter just connect everything and scan

Sorry to disagree Alex, but is better to scan without LAN-cable
connected. Several members did not pick up all channels when scanning with LAN-cable. Then scanned without LAN-cable
connected & picked up all channels. It may be a coincidence but
as LAN-cable is not needed for scan I would remove it during scan

[alex123]

na never seen it m8 av installed 100's of them

[EAMO 2]

na never seen it m8 av installed 100's of them

You could be right Alex, but as LAN is not needed for scan why
connect it until after scan has finished. Other people could not
clear all channels on SV7 box using 1.04 firmware, but cleared
all when they used 1.03 firmware

[DW190]

LAN being connected has never had any adverse effect on my scanning.

[EAMO 2]

LAN being connected has never had any adverse effect on my scanning.

I take your point Alex, I never had problem either.

[theyel2001]

update guys scanned with cable feed and Lan in and works perfect. Got all channels

thanks everyone for your help