The Box Super USB V1.12

[romster]

you will all know when Nag3 is rolled out in your area as you will recieve a new viewing card for your original equipment. I cant see them rolling it out without first sending the card as FTA channels will be lost without it and more importantly any which are included in the packages which you have paid for. They have an obligation to provide the services which you have paid for. In short if you get a new viewing card then the starview is dead!

[larryoke]

north London area, all my friends are having the same problem with theirs

Make sure you have firmware V1.12 (menu > system info) then do a factory reset & then scan with a direct feed > turn keycode back on & set default then all should be ok.

[Bastadda]

I have the v1.12 firmware and the keycode is on and set as default.

Still no joy

I have been back reading and looking at other posts but I cant find anything that can help me.

One of my friends told me that europe has had the nagra3 system for 3 years and it still hasn't been hacked. I'm worried this could mean the end of my starview.

[unadkat]

its been running on the sat scene for a long time mate and yes hes right

VM have only just started to roll out N3

and soon you will get your new card... it would then mean that u need to Throw that Starview BOX in the BIN

regarding the V1.12 not working could please verify your location as you might be in an N3 area

regards

[larryoke]

I have the v1.12 firmware and the keycode is on and set as default.

Still no joy

I have been back reading and looking at other posts but I cant find anything that can help me.

One of my friends told me that europe has had the nagra3 system for 3 years and it still hasn't been hacked. I'm worried this could mean the end of my starview.

Taken from another site,
"Areas switched over to Nagra 3

- Aylesbury
- Chesham
- Chiltern Hills
- Harrogate
- Leeds
- Rickmansworth
- St Albans
- Watford
- York
Think this might be the end for you

[ashman]

HI

I Have starview 4 usb box and live in the watford area and have v**gin cable, it stopped working a few weeks a go, i have done factory reset and down loaded v1.12 an dstill not working any idea's and what is this Nagra 3 ?


thanks
ashman

[cactikid]

read back above posts for info.

[cactikid]

3.7 Software is for VM boxes only NOT Starview ect


*Set to receive new cards = Assumption based on N3 stream being present

*Receiving new cards = Fact

*Note: info on this list is subject to change



Current areas on 3.7

*Set to receive new cards = Assumption based on N3 stream being present

*Receiving new cards = Fact

*Note: info on this list is subject to change



Current areas on 3.7

- Aylesbury
- Barnsley
- Bedfordshire including Bedford Sandy, Biggleswade, Dunstable, Luton (Set to receive new cards)
- Bells Hill
- Bolton
- Bradford (Set to receive new cards)
- Brighton
- Casltford (Set to receive new cards)
- Chesham
- Cheshire including Warrington, Widnes
- Chiltern Hills
- Cleethorpes
- Coventry (Set to receive new cards)
- Croxley Green
- Derbyshire (Set to receive new cards)
- Dorset including Bournemouth, Poole (Receiving new cards)
- Dunbartonshire in Scotland
- Dundee in Scotland
- Durham
- East Anglia
- Essex including Harlow (Romford, Ilford, Rainham receiving new cards)
- Falkirk in Scotland
- Fife in Scotland
- Gateshead
- Glasgow in Scotland
- Grimsby (Set to receive new cards)
- Halifax (Set to receive new cards)
- Hampshire including Gosport, Aldershot, Farnborough
- Harrogate
- Hartlepool
- Hertfordshire including Stevenage, Hemel Hempstead, Bishops Stortford Watford, Rickmansworth South Hertfordshire, (Hitchin, Letchworth, St Albans, Ware, Hertford, Hoddesdon, Cheshunt, receiving new cards)
- High Wycombe
- Horley
- Huddersfield (Receiving new cards)
- Humberside
- Immingham
- Keighley (Set to receive new cards)
- Kent including Swanley, Bexley, Ashford, Dartford, Dover (Receiving new cards)
- Kirklees including Dewsbury, Batley (Receiving new cards)
- Lancashire including Chorley, Preston, Burnley, Nelson, Accrington, Colne, Blackburn
- Leeds
- Leicestershire (Set to receive new cards)
- Lincolnshire (Set to receive new cards as part of Nottingham headend)
- Liverpool
- London 41050 including Harrow, Wembley, Lewisham (East London, South London, Seven Kings receiving new cards)
- Lothian in Scotland including Edinburgh city
- Manchester including Swinton, Salford, Stretford, Stockport, Wigan
- Middlesbrough
- Middlesex including Staines
- Newcastle
- Newcastle-under-Lyme
- North & South Lanarkshire in Scotland
- North Shields
- Norwich (Set to receive new cards)
- Nottinghamshire (Set to receive new cards)
- Oldham
- Paisley in Scotland
- Peterborough
- Portsmouth (Receiving new cards)
- Reading
- Rotherham
- Rugby (Set to receive new cards)
- Scun'thorpe
- Sheffield
- Solent (Set to receive new cards)
- Southampton
- South Humberside (Set to receive new cards as part of Nottingham headend)
- South Shields
- South Tyneside
- St. Helens
- Stockton-on-Tees
- Stoke-on-Trent
- Sunderland
- Surrey including Guildford, Woking, Frimley, Farnham, Camberley, Epsom
- Sussex including Crawley (Receiving new cards)
- Teesside
- Tonbridge including Tonbridge wells, Edenbridge, Lower Surrey (Set to receive new cards)
- Uddingston in Scotland
- Wirral
- York


Areas switched over to Nagra 3

- Aylesbury
- Chesham
- Chiltern Hills
- Harrogate
- Leeds
- Rickmansworth
- South Hertfordshire
- St Albans (excw parts only)
- Watford
- York


01/12/09, 05:43 PM - last edited on 18/02/10, 05:52 PM

Virgin Media has started to send out new smartcards to its TV customers, currently we're sending them to customers in Watford, Seven Kings, Kirklees, Wessex-Poole and Ashford. The new smartcard is easy to swap with the old - find out how at Switching your Smart Card.

The new smartcard is important. It works differently to the old card, and uses newer technology which will form part of a range of exciting new digital TV services from 2010 and onwards, including more HD channels, new TV on demand features and of course we’re also working on integrating TiVo into our TV service too!

Customers in the Watford, Seven Kings, Kirklees, Wessex-Poole and Ashford should have already received their new cards (or will be recieving them soon) and it’s important your old card is swapped out as soon as possible. Over the next few days, in the regions listed, we’ll be turning off some of the older TV signals on our network so if you haven’t swapped the card yet, please do so as soon as you can to ensure an uninterrupted service.

If you are in the Watford, Seven Kings, Kirklees, Wessex-Poole or Ashford areas and think you need a new smartcard please head to Switching your Smart Card and check our frequently asked questions (FAQ).

If you’re not in one of the regions listed, don’t panic, everyone will be getting a new smartcard. We’ll be going around the country region by region as we upgrade our TV service, and we’ll be in touch by post when it’s your turn. In the meantime, don’t worry there won’t be any changes to your TV service until that time.

[muster1]

my starview 4 box super usb has gone down in durham.. does anybody know if the firmware v1.12 will reinstate my channels.. dont want to mess on flashing if i dont need to.
thanks in advance.


quick update: ran v1.12 and everything is bck up and runing

[liammonk]

Favourites??

Had the box for a few months now, just need to update with the latest firmware to get back to normal (been busy!), but more importantly, is there a way to sort the channels in to personalised favourites, or am I stuck with what the box decides? I.e. movies, sports etc. The only thing that my old freeview had going for it was the fact that I could hand-select as many or as few channels as I wanted and put them in a separate list for speedier browsing. It looks like the options is almost there but I can not seem to make it do anything!?! Thanks

[RAJV]

I have box super UBS, and have lost most of the $ channels. I've been told that the software needs updating. the filmware was 1.07, which i've updated to 1.09, (now i have subtitles) but still no change on the channel front.

can anyhone help ? do i need the 1.12update or is it anything more serious.

live in UK, in middlesex.

[boomer39]

I have box super UBS, and have lost most of the $ channels. I've been told that the software needs updating. the filmware was 1.07, which i've updated to 1.09, (now i have subtitles) but still no change on the channel front.

can anyhone help ? do i need the 1.12update or is it anything more serious.

live in UK, in middlesex.

yes, update to 1.12, should be ok then..

[cactikid]

more serious will be nagra3 when it comes to you.

[rcooper82]

the box super usb v1.12

Hi, pretty new to this, just downloaded v1.12 for the box superusb but I cannot view the movie channels. All other channels work fine. Has anyone any ideas Thanks in advance.

[seanbhoy67]

hi there ! complete noob here,how do i put the v1.12 firmware on to the box