Only 11 channels

[robo25081]

Hey guys just installed the new firmware then did a reset. And now when I scan I'm only getting 11 channels any ideas wud be great

[enzee]

1. Copy the file to your USB
2. Install
3. Do a factory reset
4. Scan for channels in your area
5. When channel scan completes go to a channel and type 1819
6. Wait a few minutes and connection should be established

[robo25081]

Yh I have tried that but I only get 11 channels altogether there's no others there and no radio channels were found either

[tyson36]

have you tries dif qam?

[kyladog]

Yh I have tried that but I only get 11 channels altogether there's no others there and no radio channels were found either

set box to how it was b4 it went down by reloading carling 4,make sure emulator is on by going to accessories,type 8989 on remote,make sure ustream is on by going to options/network/net app/ustream,now auto scan all channels should appear,now load new firmware s/w upgrade then go to channels dont factory default or scan,go ss1 and type in 1819.

[brin251]

Yh I have tried that but I only get 11 channels altogether there's no others there and no radio channels were found either

u should wipe ya box completely install the firmware your box will then reboot u must then do a factory reset then go to installation and do a auto scan now depending on where u r in UK your baud rate is different
Mine is 6952 and i scan at 64 for my qam rate u will see this under baud rate
Next just press scan and u should get bout 300 channels if u dont try a couple of time failing that undo your cable connection and check all is tight and firm
I had to do this several times to work and hey presto Sorted

Brin

[robertgorton1]

starview

set box to how it was b4 it went down by reloading carling 4,make sure emulator is on by going to accessories,type 8989 on remote,make sure ustream is on by going to options/network/net app/ustream,now auto scan all channels should appear,now load new firmware s/w upgrade then go to channels dont factory default or scan,go ss1 and type in 1819.

does this get the sky sports on

[kyladog]

does this get the sky sports on

gets all channels that are on inc ss

[kyladog]

gets all channels that are on inc ss

i only did this when all i could get was 11 channels,the other way seems to work for others

[robo25081]

Thank I will giv it a try later any ideas were to get the 1.04 file from

[kyladog]

Thank I will giv it a try later any ideas were to get the 1.04 file from

bigmaq toolbar

[alotmentman]

Thank I will giv it a try later any ideas were to get the 1.04 file from

go to downloads on main sv page mate click sv dloads in there dont forget ta thanks button