The Box SV2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • khenryashley
    DK Veteran
    • Dec 2008
    • 783

    #1

    The Box SV2

    I Have flashed the new firmware 4.55 on my SV2 the box.
    It is now stuck with the digital display dispalying On.
    Will not switch on or off with remote.
    Anything I need to do.
    Thanks
    Ash
  • curve
    Newbie
    • Nov 2008
    • 5

    #2
    Have you tried the fix by zran on december 4 it's back about 7 pages.

    Comment

    • ramjet
      DK Veteran
      • Nov 2008
      • 2995

      #3
      turn it off , then start to reflash with v4.54 firmware , then let it reboot and factory reset it and test it works

      if its ok and says 4.54 in system info , then flash it with v4.55 again and let it reboot , factory reset from menu and check its ok

      if ok turn emu to on and hit set keys default with menu 1570 secret menu screen

      Comment

      • khenryashley
        DK Veteran
        • Dec 2008
        • 783

        #4
        Originally posted by ramjet
        turn it off , then start to reflash with v4.54 firmware , then let it reboot and factory reset it and test it works

        if its ok and says 4.54 in system info , then flash it with v4.55 again and let it reboot , factory reset from menu and check its ok

        if ok turn emu to on and hit set keys default with menu 1570 secret menu screen
        Thanks

        I will give it a go 2moz and let you know.

        Comment

        • khenryashley
          DK Veteran
          • Dec 2008
          • 783

          #5
          Originally posted by curve
          Have you tried the fix by zran on december 4 it's back about 7 pages.
          Many thanks

          I will give it a go and let you know.
          Ash

          Comment

          • khenryashley
            DK Veteran
            • Dec 2008
            • 783

            #6
            Originally posted by curve
            Have you tried the fix by zran on december 4 it's back about 7 pages.
            Thanks curve
            Followed the instructions to the letter and it worked perfect.

            Comment

            • khenryashley
              DK Veteran
              • Dec 2008
              • 783

              #7
              Thanks Ramjet.
              Everything up and running.

              Comment

              Working...