Starview 3 not working

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • scott.herring
    Member
    • Nov 2008
    • 70

    #1

    Starview 3 not working

    Hi guys,

    I have a starview 3 that has been working fine on the old firmware until this evening. There were problems about a fortnight ago but they were fixed by new keys.

    Just after 6pm my box stopped working. Is it necessary to update the firmware?? New keys don't seem to work.

    Your help will be greatly appreciated.
  • cng1958
    Junior Member
    • Nov 2008
    • 21

    #2
    Use the updated firmware,that will get you back up and running

    Comment

    • maak2025
      Newbie
      • Nov 2008
      • 1

      #3
      which one is updated f.ware. is it 8.02?

      Comment

      • scott.herring
        Member
        • Nov 2008
        • 70

        #4
        At present i don't have the cable to flash it with new software. Will i be able to use the keys manually until i get hold of the cable i need??

        Comment

        • satsmo
          V.I.P. Member
          • Jun 2008
          • 6397

          #5
          Originally posted by maak2025
          which one is updated f.ware. is it 8.02?
          Yes for a Starview 3 in the UK.
          I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

          Comment

          • satsmo
            V.I.P. Member
            • Jun 2008
            • 6397

            #6
            Originally posted by scott.herring
            At present i don't have the cable to flash it with new software. Will i be able to use the keys manually until i get hold of the cable i need??
            Yes if you like.
            I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

            Comment

            • scott.herring
              Member
              • Nov 2008
              • 70

              #7
              Thank you.

              The cable that i need, is it the type that would connect a pc monitor to a base unit??

              Comment

              • good2know
                Member
                • Nov 2008
                • 47

                #8
                not a com lead you need a "null modem cable" links from your pc to the back of the box you have. using the udate software program it takes only a few seconds to update the firmware.

                using the latest firmware should bring you back life..

                not sure if i'm allowed to advetise codes on forum, so not going to upset owners,
                but should you find the code the
                type in
                1570 on the menu screen the go into nacra....

                pull across to you area service provider and type in the codes for both 00 and 01

                remember to press store after each code.. exit and switch ensure the emu is switched on .

                best of luck

                G2K

                Comment

                • Wale04
                  Member
                  • Nov 2008
                  • 44

                  #9
                  Stairview 3 not working ireland

                  hi,
                  Where can i down load latest firmwar* for starview 3? and can this work in dublin -ireland

                  Comment

                  • amrud
                    Newbie
                    • Mar 2010
                    • 1

                    #10
                    i have the sam eproblem how did u solve it?

                    Comment

                    • khenryashley
                      DK Veteran
                      • Dec 2008
                      • 783

                      #11
                      Originally posted by Wale04
                      hi,
                      Where can i down load latest firmwar* for starview 3? and can this work in dublin -ireland

                      Sorry mate. SV3 will not work in Ireland.

                      Comment

                      • cactikid
                        V.I.P. Member
                        • Sep 2008
                        • 12017

                        #12
                        Originally posted by khenryashley
                        Sorry mate. SV3 will not work in Ireland.
                        it would have then,notice the date ,only doorstops in irl now.

                        Comment

                        • khenryashley
                          DK Veteran
                          • Dec 2008
                          • 783

                          #13
                          Originally posted by cactikid
                          it would have then,notice the date ,only doorstops in irl now.

                          OOPS
                          Its that ~~~~ing doctor who again.

                          Comment

                          • cactikid
                            V.I.P. Member
                            • Sep 2008
                            • 12017

                            #14
                            see if i can dig up a 2000 post not answered

                            Comment

                            Working...