starview 4 usb brick

[satsmo]

Yes that is the usual file that comes with the Max232 and some other info from elsewhere.

[flerten]

Hi Zeeraak
Please advise on your fix
Thanks in advance

[flerten]

FIX

Sorry, I should finish the thread before posting.

Gonna try the supplier first and if not grab the gizmo from custom circuits.

What Im not clear on is why this happened.

I did the flash. Everything was working fine...

Then I unplugged the box and took it to a friends and it displayed the 8882 error.

From reading the forums it seems there are two schools of thought as to the cause. One is a bad flash (it worked for ages so hard to understand if it was this) or a hardware fault.

Any further clarification would be appreciated. Im quite enjoying the tinkering

[surfer_2010uk]

starview 4 firmware

Hi,

Im new to this site, just want to know how to flash the latest firmware for the Starview 4 USB model.

I am looking for the firmware that includes the autokey roll update and the channel listings and any other useful files.

Thanks

[bumble]

hi,,

have a read through this

http://www.digital-kaos.co.uk/forums/f83/its-here-idiots-guide-starview-4-initial-setup-30784/

bumble

[cactikid]

8882 can be caused by inserting or removing usb stick while box is on,power off at front first,then back,wait 30 secs then safe to remove.

[welshwilly]

8882 can be caused by inserting or removing usb stick while box is on,power off at front first,then back,wait 30 secs then safe to remove.

Mine packed in yesterday.. It must be a software problem as I havent put the USB stick in since I downloaded the codes 2 months ago..

Will.

[Spacerat]

Mine packed in yesterday.. It must be a software problem as I havent put the USB stick in since I downloaded the codes 2 months ago..

Will.

Same thing, but I haven't taken my USB stick out since I flashed it (was still in when the problem started). Is there an inherent design flaw with these units?

Spacerat

[bjbeirne]

hope this help some of you guys. i'll need to get my soldering iron out
Attached Files8882_FIX.rar (4.04 MB, 9 views)


i am going to try this people , wil let you all know. do i need to put logo back on though to??

[djpaulm]

Hi guys, need a bit of help please bought starview 4 couple of months ago and all of a sudden its dispalying 8882 on box and wont let me do anything.Supplier being not to helpful in replacing it so wondering is there anyway to fix this problem or am i best just buying a new box...obv from another supplier!!

Thanks

[mtv1]

8882 can be caused by inserting or removing usb stick while box is on,power off at front first,then back,wait 30 secs then safe to remove.

sounds like this again try flashing with null modem cable ???

[dellboy87]

hi
is there anyone could tell me i got the same problem with my starview super usb i just bought it, but it show 8882 in front, also i can not download anything frim this site, is there any reason why i have same problem

[dellboy87]

hi thx a lot

[martin-f]

downloading anything wont solve your problem m8
talk to your suplier and send it back if pos
if not you will have to jtag it there is plenty of information on this site do a bit of reading though threads m8 good luck

[bushkin7110]

Starview 4 uk firmware

What is the latest firmware for the uk