Starview 1

[matjay]

I have a starview 1 and a starview 2 I have put the new fix 4.57 onto my starview 2 and everything is ok. But I also put the same fix onto mt starview 1 and now when I turn the machine on it starts to boot and the lights start to go cross the screen but stop on the last one. It is now frozen on this and I cant get it working. Is there a way to get this back to the original firmware or can I just download the fix for the straview 1.

Any help would be great
Cheers

[mm009b]

try reflash with v1.5 on bigmaq 17/12/08 hope this helps mate good luck

[rampantic]

I have a starview 1 and a starview 2 I have put the new fix 4.57 onto my starview 2 and everything is ok. But I also put the same fix onto mt starview 1 and now when I turn the machine on it starts to boot and the lights start to go cross the screen but stop on the last one. It is now frozen on this and I cant get it working. Is there a way to get this back to the original firmware or can I just download the fix for the straview 1.

Any help would be great
Cheers

Is your SV1 a clone matjay?

[camelv]

try

try pressing d/load as soon as your power your box up.the 1.5 core 257 will work in genuine or clone boxes,but to be on the safe side put the 1.5 core 400 if its genuine box and the 1.5 core 257 for the clone box

[ebony202000]

please can anyone help me,cause my ddigital is frozen and i don't have the new software to flash my box.

[matjay]

Thanks

Thanks everyone for the help I reflashed with a older fix I had on my pc and it stopped the freeze than downloaded the proper fix for the starview 1 and hey presto it works now.